Opinion on motor status 292

Posted By capelo 6 Years Ago

You don't have permission to rate!

Opinion on motor status 292

Author	Message
capelo	Posted 6 Years Ago
Supercharged Group: Forum Members Last Active: 5 Years Ago Posts: 279, Visits: 4.5K	Hola, estoy iniciando mi restauración y me gustaría una opinión sobre lo que estoy encontrando en el desmontaje, pongo fotos
	Reply Quote
Reply
Ted	Posted 6 Years Ago
Co-Administrator Group: Administrators Last Active: 2 days ago Posts: 7.4K, Visits: 205.4K	KULTULZ (12/23/2019) I am watching (and learning) on the sidelines - This post is not meant to interfere with the discussion between the OP and TED in any way. What we are saying is that the ARP bolt has a head with small integral washer that skews the actual bolt shank off to one side and that the area on the rod @ the bolt head has to be relieved to allow the ARP bolt to center correctly within the rod to accept the rod cap correctly? I wonder why we (at the least myself) have not heard of this before? Would that area on the rod be different between a 292 and 312 rod? When using the ARP 154-6004 rod bolts in the ECZ, C1TE, and C2AE rods, I don’t experience much issue with rod bolt fitment in those rods. The EBU rods do require a longer bolt and that’s where the ARP 154-6005 rod bolt set comes into play. It’s when using the ARP 154-6005 bolts in the EBU rods that I occasionally must lightly grind on the exterior part of the rod bolt heads so they properly seat in the spot faced recess in the rod. The head design between the 6004 and 6005 rod bolt sets is different which explains to some degree why there is a fitment problem. This likely hasn’t been brought up as most ‘do it yourself’ engine assemblers send their connecting rods out to be reconditioned. Those shops doing the rod resizing performs the bolt head modifications as a standard practice so it’s not even mentioned. I’ve come across the rod bolt fitment issues in other engines also so it’s not just a Y problem. I’ve been doing this long enough that it seems second nature. I did come close to going into a tyrade on this subject but I'll just trudge forward and leave it alone. Lorena, Texas (South of Waco)
	Reply Quote

Threaded View

Opinion on motor status 292 By capelo ( 6 Years Ago )

Looks like an oil burner By Cliff ( 6 Years Ago )

That seemed to me, what are those two small holes in the center? By capelo ( 6 Years Ago )

[quote][b]capelo (12/7/2019)[/b][hr] ..... What are those two small... By Ted ( 6 Years Ago )

[quote][b]Ted (12/7/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

[img]http://forums.y-blocksforever.com/uploads/images/df272df7-37ac-4a... By capelo ( 6 Years Ago )

[quote][b]capelo (12/7/2019)[/b][hr]...... what are those two small... By Ted ( 6 Years Ago )

[QUOTE]In looking at the picture of your cylinder head, it would... By KULTULZ ( 6 Years Ago )

[img]http://forums.y-blocksforever.com/uploads/images/06bd41d7-1b8b-40... By capelo ( 6 Years Ago )

[img]http://forums.y-blocksforever.com/uploads/images/dc30d93e-89b2-4e... By capelo ( 6 Years Ago )

[img]http://forums.y-blocksforever.com/uploads/images/9056588f-284a-48... By capelo ( 6 Years Ago )

the block would have came with the holes.i had the same setup years... By darrell ( 6 Years Ago )

[img]http://forums.y-blocksforever.com/uploads/images/818f9ad0-1c9f-42... By capelo ( 6 Years Ago )

If the paint is not designed for continuous contact / submersion in... By charliemccraney ( 6 Years Ago )

[cita] [b] charliemccraney (12/08/2019) [/ b] [hr] Si... By capelo ( 6 Years Ago )

Just the same. You do not want it to deteriorate and flake of and... By charliemccraney ( 6 Years Ago )

the old one seems somewhat deformed, the one at the top can be the... By capelo ( 6 Years Ago )

[quote][b]capelo (12/9/2019)[/b][hr]The old one seems somewhat... By Ted ( 6 Years Ago )

[quote][b]Ted (12/9/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

... By capelo ( 6 Years Ago )

[quote][b]capelo (12/9/2019)[/b][hr]Different but the same?... By Ted ( 6 Years Ago )

[quote][b]Ted (12/9/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

[img]http://forums.y-blocksforever.com/uploads/images/08489ee6-88c5-42... By capelo ( 6 Years Ago )

[img]http://forums.y-blocksforever.com/uploads/images/d5689f67-4527-4e... By capelo ( 6 Years Ago )

Can this be a problem?... By capelo ( 6 Years Ago )

[quote][b]capelo (12/9/2019)[/b][hr]Can this be a problem? [/quote]... By Ted ( 6 Years Ago )

[quote][b]Ted (12/10/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

[quote][b]capelo (12/10/2019)[/b][hr]... Would it be possible to fill... By Ted ( 6 Years Ago )

[quote][b]Ted (12/11/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

there is a small difference... By capelo ( 6 Years Ago )

how do they... By capelo ( 6 Years Ago )

Is this necessary or just an... By capelo ( 6 Years Ago )

How large are the bolts that cover the pressure line of the block? By capelo ( 6 Years Ago )

[quote][b]capelo... By Ted ( 6 Years Ago )

If you can figure out how to ship it, I have a nice standard 272 block... By Florida_Phil ( 6 Years Ago )

[quote][b]Florida_Phil (12/16/2019)[/b][hr] If you can figure out... By capelo ( 6 Years Ago )

I don't suppose it would fit in your suitcase? :) [quote][b]capelo... By Florida_Phil ( 6 Years Ago )

[quote][b]Florida_Phil (12/16/2019)[/b][hr] I don't suppose it... By capelo ( 6 Years Ago )

[quote][b]Ted (12/16/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

it seems that that cover was badly mounted, rubbed with the... By capelo ( 6 Years Ago )

Hi guys, I am changing the bolts of the cranks for some ARP 154-6005,... By capelo ( 6 Years Ago )

[quote][b]capelo (12/20/2019)[/b][hr]Hi guys, I am changing the bolts... By Ted ( 6 Years Ago )

[quote][b]Ted (12/20/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

[quote][b]capelo (12/21/2019)[/b][hr]Thanks Ted. The rectification of... By Ted ( 6 Years Ago )

[quote][b]Ted (12/22/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

[quote][b]capelo (12/22/2019)[/b][hr]...what is the original size of... By Ted ( 6 Years Ago )

Checking the rocker trees, I have noticed that in one of them it has... By capelo ( 6 Years Ago )

[quote][b]capelo (12/22/2019)[/b][hr]Checking the rocker trees, I have... By Ted ( 6 Years Ago )

[quote][b]Ted (12/24/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

Are you saying the actual rockers arms appear to have different... By KULTULZ ( 6 Years Ago )

Today I went through the rectification workshop, I took the rods and I... By capelo ( 6 Years Ago )

I am watching (and learning) on the sidelines - This post is not... By KULTULZ ( 6 Years Ago )

[quote][b]KULTULZ (12/23/2019)[/b][hr]I am watching (and learning) on... By Ted ( 6 Years Ago )

[quote][b]capelo (12/23/2019)[/b][hr]Today I went through the... By Ted ( 6 Years Ago )

TED, I want to personally THANK YOU for your time and interest and... By KULTULZ ( 6 Years Ago )

[quote][b]Ted (12/24/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

There are some things in a refurbish that I have always considered... By Joe-JDC ( 6 Years Ago )

[quote][b]Joe-JDC (12/24/2019)[/b][hr] There are some things in a... By capelo ( 6 Years Ago )

The rocker arm shafts are readily available. The rocker arms, are... By Tedster ( 6 Years Ago )

[quote]What rockers are sold online? and rods?[/quote] Rocker Arms... By KULTULZ ( 6 Years Ago )

Thanks for the answers, on the rods I will wait for you to tell me... By capelo ( 6 Years Ago )

[quote][b]capelo (12/25/2019)[/b][hr]... If someone can give me the... By Ted ( 6 Years Ago )

i find new rockers to pricey for me.i have lots of sets around and... By darrell ( 6 Years Ago )

[quote][b]Ted (12/26/2019)[/b][hr] [quote][b]capelo... By capelo ( 6 Years Ago )

Opinión... By capelo ( 6 Years Ago )

Those are reman conn rods. They will be exchange meaning they will... By KULTULZ ( 6 Years Ago )

[quote][b]KULTULZ (12/27/2019)[/b][hr] Those are reman conn rods.... By capelo ( 6 Years Ago )

I'm having trouble removing these two plugs, any suggestions?... By capelo ( 5 Years Ago )

Capelo. From John Mummert's web site, topic 'Y-BLOCK TECHNICAL... By NoShortcuts ( 5 Years Ago )

[quote][b]NoShortcuts (1/5/2020)[/b][hr] Capelo. From John... By capelo ( 5 Years Ago )

after a good fight got 👍... By capelo ( 5 Years Ago )

a necessary... By capelo ( 5 Years Ago )

Any suggestions for... By capelo ( 5 Years Ago )

Heat the ring gear in the oven, the other part in the freezer... By paul2748 ( 5 Years Ago )

Heat the ring gear in the oven, the flywheel in the freezer... By paul2748 ( 5 Years Ago )

Hi there http://www.ford-y-block.com/dimensions.htm... By stuey ( 6 Years Ago )

[quote][b]stuey (12/26/2019)[/b][hr] Hi there... By capelo ( 6 Years Ago )

at what diameter did this hole pierce? it is now 0.060"... By capelo ( 6 Years Ago )

That hole sizing is fine but don’t go any larger than that. The oil... By Ted ( 5 Years Ago )

[quote][b]Ted (1/1/2020)[/b][hr] That hole sizing is fine but... By capelo ( 5 Years Ago )

Good to see you got that threaded plug out. They can be problematic... By Ted ( 5 Years Ago )

[quote][b]Ted (1/6/2020)[/b][hr] Good to see you got that... By capelo ( 5 Years Ago )

Another way of moving stubborn plugs or broken bolts is to weld a nut... By paul2748 ( 5 Years Ago )

[quote][b]paul2748 (1/7/2020)[/b][hr] Another way of moving... By capelo ( 5 Years Ago )

I feel very upset with this, I bought a new oil pump thinking it would... By capelo ( 5 Years Ago )

Gerotor pumps aren't available new. Rebuild kits are available,... By charliemccraney ( 5 Years Ago )

[quote][b]charliemccraney (1/9/2020)[/b][hr] Gerotor pumps aren't... By capelo ( 5 Years Ago )

this serves for me... By capelo ( 5 Years Ago )

So were my valves, any opinions? How can I proceed for... By capelo ( 5 Years Ago )

If you have access to a soda blaster, it will clean those valves... By Joe-JDC ( 5 Years Ago )

[quote][b]Joe-JDC (1/11/2020)[/b][hr] If you have access to a soda... By capelo ( 5 Years Ago )

Oven cleaner will clean the carbon off of the valves Carl By carl ( 5 Years Ago )

[quote][b]carl (1/12/2020)[/b][hr] Oven cleaner will clean the... By capelo ( 5 Years Ago )

[quote][b]capelo (1/11/2020)[/b][hr] this serves for me... By capelo ( 5 Years Ago )

Not sure, but that clutch assembly is not listed for a Y-Block.. so ?... By PF Arcand ( 5 Years Ago )

Personally, like the Centerforce clutches, the dual friction model.... By paul2748 ( 5 Years Ago )

today I was modifying the heads to place positive style valve seals, I... By capelo ( 5 Years Ago )

what or where is the other site,why no comments avail or able to view.... By 2721955meteor ( 5 Years Ago )

I asked for a change from lever style to diaphragm style By capelo ( 5 Years Ago )

[quote][b]capelo (1/15/2020)[/b][hr]I asked for a change from lever... By Ted ( 5 Years Ago )

[quote][b]Ted (1/15/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]2721955meteor (1/15/2020)[/b][hr] What or where is the... By Ted ( 5 Years Ago )

Be sure to check the retainer to valve seal clearance. You’ll want... By Ted ( 5 Years Ago )

In case anyone is interested, I think I have found a replacement for... By capelo ( 5 Years Ago )

[quote][b]Ted (1/19/2020)[/b][hr] Be sure to check the retainer... By capelo ( 5 Years Ago )

[quote][b]capelo (1/19/2020)[/b][hr][quote][b]Ted (1/19/2020)[/b][hr]... By Ted ( 5 Years Ago )

[quote][b]Ted (1/21/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

After adapting the valve guides, I am looking for new seals, they have... By capelo ( 5 Years Ago )

[quote][b]Ted (1/19/2020)[/b][hr] Be sure to check the retainer... By capelo ( 5 Years Ago )

I only see .500 "-.502" -. 530 ", could anyone fit in? By capelo ( 5 Years Ago )

For positive type valve seals, I use U.S.Seals Inc . For the 11/32”... By Ted ( 5 Years Ago )

[quote][b]Ted (1/24/2020)[/b][hr] For positive type valve seals,... By capelo ( 5 Years Ago )

I screwed up, I hadn't measured accurately enough, it should be 11/32... By capelo ( 5 Years Ago )

The VS107V seal is rubber lined on its inside and doing a rough... By Ted ( 5 Years Ago )

[quote][b]Ted (1/27/2020)[/b][hr] The VS107V seal is rubber lined... By capelo ( 5 Years Ago )

Following Ted's advice, I have manufactured a new fixing piece for the... By capelo ( 5 Years Ago )

I've seen these guides in some heads... By capelo ( 5 Years Ago )

One of the procedures that can be utilized to restore the clearance of... By NoShortcuts ( 5 Years Ago )

Charlie, one of the better quality knurling outfits uses a guide rod... By Hoosier Hurricane ( 5 Years Ago )

thanks guys for the clarifications 👍 By capelo ( 5 Years Ago )

[quote][b]Hoosier Hurricane (2/3/2020)[/b][hr] Charlie, one of the... By NoShortcuts ( 5 Years Ago )

today the new rocker adjusters have arrived, they look... By capelo ( 5 Years Ago )

I am manufacturing a pulley for the power steering pump, any comments... By capelo ( 5 Years Ago )

Copelo, it's very difficult for me to determine with my eyesight but... By FORD DEARBORN ( 5 Years Ago )

[quote][b]FORD DEARBORN (2/4/2020)[/b][hr] Copelo, it's very... By capelo ( 5 Years Ago )

I am not an expert in metallurgy by any stretch but IMHO some issues... By FORD DEARBORN ( 5 Years Ago )

[quote][b]FORD DEARBORN (2/4/2020)[/b][hr] I am not an expert in... By capelo ( 5 Years Ago )

Sometimes I tend to over think the issue. I didn't realize the... By FORD DEARBORN ( 5 Years Ago )

[quote][b]FORD DEARBORN (2/4/2020)[/b][hr] Sometimes I tend to... By capelo ( 5 Years Ago )

My concern now is about the possible excessive weight and how far I... By capelo ( 5 Years Ago )

I have another question, I have seen the sale of aluminum thermostat... By capelo ( 5 Years Ago )

[quote][b]capelo (2/5/2020)[/b][hr]I have another question, I have... By Ted ( 5 Years Ago )

I have also seen in several images of "Y" engines that carry what they... By capelo ( 5 Years Ago )

Capelo. An oil deflector inside the (ignition) distributor housing?... By NoShortcuts ( 5 Years Ago )

[quote][b]NoShortcuts (2/6/2020)[/b][hr] Capelo. An oil... By capelo ( 5 Years Ago )

I think he is referring to the oil slinger By 57RancheroJim ( 5 Years Ago )

Capelo. As Ted indicated, the oil trough was only used on FoMoCo... By NoShortcuts ( 5 Years Ago )

[quote][b]capelo (2/5/2020)[/b][hr]I have also seen in several images... By Ted ( 5 Years Ago )

When I assembled my current engine, I had what I thought was an issue... By Florida_Phil ( 5 Years Ago )

thanks guys for your comments, can those baffles be achieved or would... By capelo ( 5 Years Ago )

On the housing of thermostat I will consult with the seller if there... By capelo ( 5 Years Ago )

[quote][b]capelo (2/7/2020)[/b][hr]thanks guys for your comments, can... By Ted ( 5 Years Ago )

Ted, today I received the valve seals and some caps, from US SEAL.... By capelo ( 5 Years Ago )

Here is a picture showing the three basic styles of thermostat... By Ted ( 5 Years Ago )

Ted, thanks for the information, I think I'll have to settle for my... By capelo ( 5 Years Ago )

While I have the engine material in the machine shop, I wanted to... By capelo ( 5 Years Ago )

If you get all the various parts within ½ gram or less, you’ll be... By Ted ( 5 Years Ago )

[quote][b]Ted (2/11/2020)[/b][hr] If you get all the various... By capelo ( 5 Years Ago )

The design and construction of the piston will determine where the... By Ted ( 5 Years Ago )

[quote][b]Ted (2/13/2020)[/b][hr] The design and construction of... By capelo ( 5 Years Ago )

I have already brought the heads of the machine, I have to give it a... By capelo ( 5 Years Ago )

hello I have put the camshaft bushings and I have some doubt, first... By capelo ( 5 Years Ago )

I have seen this to relieve space, what do you think?... By capelo ( 5 Years Ago )

In regards to the picture asking where to take the material off of... By Ted ( 5 Years Ago )

[quote][b]Ted (2/15/2020)[/b][hr] In regards to the picture... By capelo ( 5 Years Ago )

well I have already solved the two problems, I have drilled the... By capelo ( 5 Years Ago )

This is a photo that the OP had posted many pages ago, what is the... By 1946international ( 5 Years Ago )

Oil trough for timing chain with oil coming from the lifter galley. By Rudder2fly ( 5 Years Ago )

is that a stock part? I have never seen one. By 1946international ( 5 Years Ago )

The timing chain oil troughs were factory installed on the 1954-1956... By Ted ( 5 Years Ago )

I see that you have already clarified the question about the extra... By capelo ( 5 Years Ago )

today has touched a little decoration.... By capelo ( 5 Years Ago )

What clearance does the harmonic damper have on the crankshaft shaft?... By capelo ( 5 Years Ago )

[quote][b]capelo (2/23/2020)[/b][hr] What clearance does the... By capelo ( 5 Years Ago )

[quote][b]capelo (2/23/2020)[/b][hr]What clearance does the harmonic... By Ted ( 5 Years Ago )

[quote][b]Ted (2/27/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

I can't publish a video By capelo ( 5 Years Ago )

I have finally got the rods, I tried to think them for balance, I made... By capelo ( 5 Years Ago )

Can you place something wide across the scale, like a board or a tray,... By MplsMike ( 5 Years Ago )

Friction of the wrist pin. By Lord Gaga ( 5 Years Ago )

Where are you measuring the bore of the pulley? The pulleys are... By Hoosier Hurricane ( 5 Years Ago )

[quote][b]Hoosier Hurricane (2/27/2020)[/b][hr] Where are you... By capelo ( 5 Years Ago )

Capelo. I watched the video you sent and the video really does not... By Ted ( 5 Years Ago )

[quote][b]Ted (2/29/2020)[/b][hr] Capelo. I watched the video... By capelo ( 5 Years Ago )

Short of taking it to someone with the right tools and paying them to... By charliemccraney ( 5 Years Ago )

[quote][b]charliemccraney (2/29/2020)[/b][hr] Short of taking it... By capelo ( 5 Years Ago )

Capelo. I have twelve Y crankshafts sitting here in the shop from... By Ted ( 5 Years Ago )

[quote][b]Ted (3/3/2020)[/b][hr] Capelo. I have twelve Y... By capelo ( 5 Years Ago )

The non-scale end of the rod needs to free float. Letting the rod... By Ted ( 5 Years Ago )

I have made modifications, but with the same result, the measurements... By capelo ( 5 Years Ago )

[quote][b]capelo (3/7/2020)[/b][hr]I have made modifications, but with... By Ted ( 5 Years Ago )

I have done dry assembly of the rods with the pistons to measure the... By capelo ( 5 Years Ago )

After the measurements and once disassembled everything I found these... By capelo ( 5 Years Ago )

[quote][b]capelo (3/8/2020)[/b][hr]After the measurements and once... By Ted ( 5 Years Ago )

[quote][b]capelo (3/8/2020)[/b][hr] I have done dry assembly of... By capelo ( 5 Years Ago )

[quote][b]capelo (3/8/2020)[/b][hr]I have done dry assembly of the... By Ted ( 5 Years Ago )

[quote][b]Ted (3/10/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (3/10/2020)[/b][hr]I bought the crankshaft and... By Ted ( 5 Years Ago )

Thanks for the help, I'm going to get to work on that, a question, can... By capelo ( 5 Years Ago )

I have made new measurements and I have tried to compensate the... By capelo ( 5 Years Ago )

[quote][b]capelo (3/12/2020)[/b][hr]I have made new measurements and I... By Ted ( 5 Years Ago )

[quote][b]Ted (3/13/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]Ted (3/8/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (3/8/2020)[/b][hr]The accuracy of the scale is 0.1... By Ted ( 5 Years Ago )

... By capelo ( 5 Years Ago )

well, I have already solved two problems, I have already been able to... By capelo ( 5 Years Ago )

Do you have the rod bearing weight? By Ted ( 5 Years Ago )

[quote][b]Ted (3/15/2020)[/b][hr] Do you have the rod bearing... By capelo ( 5 Years Ago )

The formula for calculating the balancing bobweight for a 90° V8 is... By Ted ( 5 Years Ago )

[quote][b]Ted (3/16/2020)[/b][hr] The formula for calculating the... By capelo ( 5 Years Ago )

I'm having trouble finding who performs the dynamic balancing of the... By capelo ( 5 Years Ago )

Dynamic balancing is required on crankshafts. As the weights of the... By Ted ( 5 Years Ago )

[quote][b]Ted (3/20/2020)[/b][hr] Dynamic balancing is required... By capelo ( 5 Years Ago )

Capelo, Just curious. Where are you located? By Lord Gaga ( 5 Years Ago )

[quote][b]Lord Gaga (3/20/2020)[/b][hr] Capelo, Just curious.... By capelo ( 5 Years Ago )

[quote][b]capelo (3/20/2020)[/b][hr]In my case I only have two... By Ted ( 5 Years Ago )

[quote][b]Ted (3/22/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (3/23/2020)[/b][hr]...Changing the subject, if... By Ted ( 5 Years Ago )

[quote][b]Ted (3/24/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

On the above mentioned I have read about the space between the ends of... By capelo ( 5 Years Ago )

[quote][b]capelo (3/24/2020)[/b][hr]...On the axial games and the... By Ted ( 5 Years Ago )

[quote][b]capelo (3/24/2020)[/b][hr]...About what you said about the... By Ted ( 5 Years Ago )

Thanks for the comments, I have checked all the rings and they are all... By capelo ( 5 Years Ago )

[quote][b]capelo (3/25/2020)[/b][hr]...I forgot a question, the... By Ted ( 5 Years Ago )

You must be in lockdown with the Yblock to keep you company at the... By ian57tbird ( 5 Years Ago )

[quote][b]ian57tbird (3/20/2020)[/b][hr] You must be in lockdown... By capelo ( 5 Years Ago )

I cannot help with the rings but if you are using the early edtion... By kevink1955 ( 5 Years Ago )

[quote][b]kevink1955 (3/24/2020)[/b][hr] I cannot help with the... By capelo ( 5 Years Ago )

[quote][b]capelo (3/24/2020)[/b][hr][quote][b]kevink1955... By Ted ( 5 Years Ago )

[quote][b]Ted (3/24/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

I have any questions with the boards when to use, I put... By capelo ( 5 Years Ago )

Another question I have is about the position of the rods in the motor... By capelo ( 5 Years Ago )

[quote][b]capelo (3/24/2020)[/b][hr]Another question I have is about... By Ted ( 5 Years Ago )

They could identify these Gasket:... By capelo ( 5 Years Ago )

One of the blue ones s/b for the rear road draft tube for a TBird. I... By paul2748 ( 5 Years Ago )

[quote][b]paul2748 (3/26/2020)[/b][hr]One of the blue ones s/b for the... By Ted ( 5 Years Ago )

Thanks for all the comments, two of the seals indicated as the oil... By capelo ( 5 Years Ago )

The gaskets indicated as for the air filter as well as the other for... By capelo ( 5 Years Ago )

I have a problem with the camshaft screw, when inserting it I see that... By capelo ( 5 Years Ago )

Be careful you are not using a metric bolt.. All bolts are SAE in... By Dave C ( 5 Years Ago )

[quote][b]Dave C (3/27/2020)[/b][hr] Be careful you are not using... By capelo ( 5 Years Ago )

[quote][b]capelo (3/27/2020)[/b][hr] I have a problem with the... By capelo ( 5 Years Ago )

Notice that the threads on the bolt on the right are not as deep as... By Hoosier Hurricane ( 5 Years Ago )

[quote][b]Hoosier Hurricane (3/27/2020)[/b][hr] Notice that the... By capelo ( 5 Years Ago )

For the Oil filter adapter I would use the Fiber gasket as the Rubber... By Robs36Ford ( 5 Years Ago )

[quote][b]Robs36Ford (3/28/2020)[/b][hr] For the Oil filter... By capelo ( 5 Years Ago )

Where is Gasket going? when I took it apart there was... By capelo ( 5 Years Ago )

This is the front of the oil filter spin-on adapter, the gasket in... By Robs36Ford ( 5 Years Ago )

[quote][b]Robs36Ford (3/28/2020)[/b][hr] This is the front of the... By capelo ( 5 Years Ago )

Well I already have everything necessary to assemble the engine, I... By capelo ( 5 Years Ago )

WD40 is not a good oil. It’s a water displacement fluid. You can still... By DryLakesRacer ( 5 Years Ago )

[quote][b]DryLakesRacer (3/31/2020)[/b][hr] WD40 is not a good... By capelo ( 5 Years Ago )

Do NOT use paper towels to wipe any internal parts of your engine!!!... By Lord Gaga ( 5 Years Ago )

Oops that was me, thinking of the past. I’ve collected white lint free... By DryLakesRacer ( 5 Years Ago )

[quote][b]Lord Gaga (4/1/2020)[/b][hr] Do NOT use paper towels to... By capelo ( 5 Years Ago )

I don’t know about the rest of you, but it has been a lot of fun... By MplsMike ( 5 Years Ago )

[quote][b]MplsMike (4/3/2020)[/b][hr] I don’t know about the rest... By capelo ( 5 Years Ago )

I have already been able to solve the low crankshaft end play, the... By capelo ( 5 Years Ago )

Another question, what's that extra hole for in the new oil... By capelo ( 5 Years Ago )

[quote][b]capelo (3/31/2020)[/b][hr]Another question, what's that... By Ted ( 5 Years Ago )

[quote][b]Ted (3/31/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (4/1/2020)[/b][hr]When disassembling the gasket are... By Ted ( 5 Years Ago )

[quote][b]Ted (4/1/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

I have another question, I have read Ted's article on mounting the... By capelo ( 5 Years Ago )

[quote][b]capelo (4/1/2020)[/b][hr]I have another question, I have... By Ted ( 5 Years Ago )

[quote][b]Ted (4/1/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

... By capelo ( 5 Years Ago )

I have disassembled the new oil pump and the gasket has come out of a... By capelo ( 5 Years Ago )

[quote][b]capelo (4/2/2020)[/b][hr] I have disassembled the new... By Dave C ( 5 Years Ago )

[quote][b]Dave C (4/3/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (4/3/2020)[/b][hr] [quote][b]Dave C... By Dave C ( 5 Years Ago )

... By capelo ( 5 Years Ago )

I don’t use any sealer on either the oil pump cover face plate or the... By Ted ( 5 Years Ago )

[quote][b]Ted (4/4/2020)[/b][hr] I don’t use any sealer on either... By capelo ( 5 Years Ago )

The gasket of the oil filter adapter, is a sealant not used either? By capelo ( 5 Years Ago )

I think I have verified this, but one more opinion... By capelo ( 5 Years Ago )

[quote][b]capelo... By Ted ( 5 Years Ago )

[quote][b]Ted (4/4/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

Also verified in the exhaust with these values: 162 ° DTDC and 74 °... By capelo ( 5 Years Ago )

I have already moved the distribution chain to the mark of R4 and... By capelo ( 5 Years Ago )

wanted I saw this on Ted's page, I think I got the camshaft setting... By capelo ( 5 Years Ago )

my opinion oaths post is it has got far to long,also it promotes... By 2721955meteor ( 5 Years Ago )

Just referring to your post where you are measuring deck clearance... By ian57tbird ( 5 Years Ago )

Here’s another option for the link count on the timing chain when... By Ted ( 5 Years Ago )

And here is the total advance before deadlock greater than 0.050 "... By capelo ( 5 Years Ago )

Assuming that the crankshaft gear is in the zero position and if... By Ted ( 5 Years Ago )

[quote][b]Ted (4/5/2020)[/b][hr] Assuming that the crankshaft... By capelo ( 5 Years Ago )

Your numbers look good. If you want to check yourself and/or the... By Ted ( 5 Years Ago )

[quote][b]Ted (4/5/2020)[/b][hr] Your numbers look good. If you... By capelo ( 5 Years Ago )

Do you use any sealant... By capelo ( 5 Years Ago )

[quote][b]capelo (4/6/2020)[/b][hr] Do you use any sealant here?... By Ted ( 5 Years Ago )

[quote][b]Ted (4/6/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

I would suggest removing the paint where the oil filter rubber seal... By Joe-JDC ( 5 Years Ago )

[quote][b]Joe-JDC (4/6/2020)[/b][hr] I would suggest removing the... By capelo ( 5 Years Ago )

[quote][b]Ted (4/6/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

Well, for today I leave it, tomorrow we continue... By capelo ( 5 Years Ago )

Tomorrow I will start mounting the heads. I have bought a new set of... By capelo ( 5 Years Ago )

sorry the tightening order if it is the same By capelo ( 5 Years Ago )

Today I end it, it already looks like an engine. Intake and cylinder... By capelo ( 5 Years Ago )

For grade eight bolts on the Ford Y, I typically torque them 70# for... By Ted ( 5 Years Ago )

[quote][b]Ted (4/7/2020)[/b][hr] For grade eight bolts on the... By capelo ( 5 Years Ago )

Only thing I would add. If the engine isn't going back in the car the... By Dave C ( 5 Years Ago )

[quote][b]Dave C (4/7/2020)[/b][hr] Only thing I would add. If the... By capelo ( 5 Years Ago )

Tomorrow I get with... By capelo ( 5 Years Ago )

The pictures of the engine are beautiful! How about some pictures of... By MplsMike ( 5 Years Ago )

[quote][b]MplsMike (4/7/2020)[/b][hr] The pictures of the engine... By capelo ( 5 Years Ago )

[quote][b]capelo (4/7/2020)[/b][hr] Tomorrow I get with... By BamaBob ( 5 Years Ago )

It appears you have the rocker arms oil overflow tube on the right... By BamaBob ( 5 Years Ago )

They look correct. They are assembled the same way. When oriented as... By charliemccraney ( 5 Years Ago )

... By capelo ( 5 Years Ago )

None of them is... By capelo ( 5 Years Ago )

I have a space... By capelo ( 5 Years Ago )

I want to leave the distributor open for the engine start, I have in... By capelo ( 5 Years Ago )

[quote][b]capelo (4/8/2020)[/b][hr]I want to leave the distributor... By Ted ( 5 Years Ago )

[quote][b]Ted (4/8/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (4/9/2020)[/b][hr]Ok, I note, at that time described,... By Ted ( 5 Years Ago )

[quote][b]Ted (4/9/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (4/9/2020)[/b][hr]I don't want to mess things up a... By Ted ( 5 Years Ago )

[quote][b]Ted (4/9/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

Your build looks great, you are paying attention to many details that... By kevink1955 ( 5 Years Ago )

For doing the Y with that distributor in a dark hole I disconnect the... By marvh ( 5 Years Ago )

Regarding the valve cover gaskets: Sometimes aftermarket covers don't... By charliemccraney ( 5 Years Ago )

[quote][b]charliemccraney (4/8/2020)[/b][hr] Regarding the valve... By capelo ( 5 Years Ago )

Following Ted's articles... By capelo ( 5 Years Ago )

A little help... By capelo ( 5 Years Ago )

That looks like a Boddingtons to me. Enjoy!! By MplsMike ( 5 Years Ago )

There is less left to return it to the... By capelo ( 5 Years Ago )

[quote][b]MplsMike (4/9/2020)[/b][hr] That looks like a... By capelo ( 5 Years Ago )

Well, I only have to make the fuel line from the pump to the carb to... By capelo ( 5 Years Ago )

[quote][b]capelo (4/9/2020)[/b][hr]....What I don't know is if I... By Ted ( 5 Years Ago )

[quote][b]Ted (4/11/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (4/11/2020)[/b][hr]Thanks for the advice, I take... By Ted ( 5 Years Ago )

[quote][b]Ted (4/13/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (4/13/2020)[/b][hr] [quote][b]Ted... By Ted ( 5 Years Ago )

Thank you, I will take that oil out and save it for another time, any... By capelo ( 5 Years Ago )

Yes that will work for timing it. You should have the distributor cap... By ian57tbird ( 5 Years Ago )

thanks guys for the comments👍 By capelo ( 5 Years Ago )

For today I leave it, tomorrow take care of yourselves 💪 By capelo ( 5 Years Ago )

This is what I have used By capelo ( 5 Years Ago )

Recycle it OR use it in you your lawnmower. By Lord Gaga ( 5 Years Ago )

I have found two bottles of this oil at home... By capelo ( 5 Years Ago )

Any residual oil remaining in the engine when draining the synthetic... By Ted ( 5 Years Ago )

[quote][b]Ted (4/15/2020)[/b][hr] Any residual oil remaining in... By capelo ( 5 Years Ago )

[quote][b]capelo (4/15/2020)[/b][hr]Here I can't find any... By Ted ( 5 Years Ago )

Capelo, it’s been a week since your last post. We are worried about... By MplsMike ( 5 Years Ago )

[quote][b]MplsMike (4/22/2020)[/b][hr] Capelo, it’s been a week... By capelo ( 5 Years Ago )

with this connection is the one with which I am not very convinced.... By capelo ( 5 Years Ago )

A single flare is ok for fuel line. By charliemccraney ( 5 Years Ago )

I’ll have to disagree with Charlie regarding the use of a single... By Ted ( 5 Years Ago )

[quote][b]Ted (4/25/2020)[/b][hr] I’ll have to disagree with... By capelo ( 5 Years Ago )

[quote][b]capelo (4/25/2020)[/b][hr]thanks for the comments, an... By Ted ( 5 Years Ago )

TUTORIAL FOR DOUBLE FLARING TUBING Remove burrs from inside... By Ted ( 5 Years Ago )

Now put the OH CRAP flare nut on the tube. Please remember the... By kevink1955 ( 5 Years Ago )

Doing a test:... By capelo ( 5 Years Ago )

Is that copper or nicopp? By 57RancheroJim ( 5 Years Ago )

I have made hundreds of single and double flares with the tool shown... By DryLakesRacer ( 5 Years Ago )

[quote][b]DryLakesRacer (4/26/2020)[/b][hr] I have made hundreds... By capelo ( 5 Years Ago )

[quote][b]57RancheroJim (4/26/2020)[/b][hr] Is that copper or... By capelo ( 5 Years Ago )

Are there various diameters in 3/8 ...? I have measured the... By capelo ( 5 Years Ago )

I believe there are 4 dies in the kit. Front the fuel to the carbs we... By DryLakesRacer ( 5 Years Ago )

I once did domestic air conditioning. Lots of flaring of copper tube,... By ian57tbird ( 5 Years Ago )

Thanks for the feedback. I also did many air conditioning... By capelo ( 5 Years Ago )

Greetings to all. If there is no setback it is Friday I will start... By capelo ( 5 Years Ago )

NICE By Cliff ( 5 Years Ago )

Cake lid air cleaner looks good on that Y By DryLakesRacer ( 5 Years Ago )

Really nice detailing on the whole works. Good luck By miker ( 5 Years Ago )

Nice work and we're waiting for Friday, the best.................. By FORD DEARBORN ( 5 Years Ago )

thanks guys, tomorrow is the day, after the initial start-up what is... By capelo ( 5 Years Ago )

[quote][b]capelo (4/30/2020)[/b][hr]Thanks guys. Tomorrow is the day.... By Ted ( 5 Years Ago )

Thanks Ted for the comments. I solved the initial problem with the... By capelo ( 5 Years Ago )

first problem I have to modify the... By capelo ( 5 Years Ago )

Leaving excess fuel in a closed cylinder could wash the rings dry. I... By Robs36Ford ( 5 Years Ago )

[quote][b]Robs36Ford (5/1/2020)[/b][hr] Leaving excess fuel in a... By capelo ( 5 Years Ago )

Response 368 and it runs.... There was a lot of rebuilding going on in... By DryLakesRacer ( 5 Years Ago )

CONGRATULATIONS! Here's hoping it runs as good as it looks. :D By Lord Gaga ( 5 Years Ago )

Well the afternoon had been better, after a review the engine started,... By capelo ( 5 Years Ago )

https://youtu.be/ghVVmELl5xw By capelo ( 5 Years Ago )

Nice, Good Job By Cliff ( 5 Years Ago )

Well done, sounds great! By 57RancheroJim ( 5 Years Ago )

Very nice well done, everything............ By FORD DEARBORN ( 5 Years Ago )

Great job..🍻🍻🍻🍻 By DryLakesRacer ( 5 Years Ago )

thanks guys hope the end result is right By capelo ( 5 Years Ago )

any advice on set-up and shooting will always be welcome By capelo ( 5 Years Ago )

[quote][b]capelo (5/3/2020)[/b][hr] any advice on set-up and... By Tedster ( 5 Years Ago )

[quote][b]Tedster (5/3/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

Hello guys. I've already done my first 70 miles with no apparent... By capelo ( 5 Years Ago )

While a wide band oxygen sensor would be a nice tool to have to see... By Ted ( 5 Years Ago )

[quote][b]Ted (5/20/2020)[/b][hr] While a wide band oxygen sensor... By capelo ( 5 Years Ago )

For carbureted engines with street rated compression ratios, 0.035”... By Ted ( 5 Years Ago )

And about the value with the vacuum gauge for carburettor... By capelo ( 5 Years Ago )

[quote][b]capelo (5/20/2020)[/b][hr]And about the value with the... By Ted ( 5 Years Ago )

[quote][b]Ted (5/21/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]capelo (5/24/2020)[/b][hr] [quote][b]Ted (5/21/2020)[/b][hr]... By Ted ( 5 Years Ago )

[quote][b]Ted (5/24/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

[quote][b]Ted (5/20/2020)[/b][hr] For carbureted engines with... By capelo ( 5 Years Ago )

is there a better option to connect the... By capelo ( 5 Years Ago )

[quote][b]capelo (5/24/2020)[/b][hr]Is there a better option to... By Ted ( 5 Years Ago )

[quote][b]Ted (5/24/2020)[/b][hr] [quote][b]capelo... By capelo ( 5 Years Ago )

OK so now take it all back apart and do it again, so we will have... By 1946international ( 5 Years Ago )

I’ve never seen so many rebuild an engine. But this many reading I... By DryLakesRacer ( 5 Years Ago )

[quote][b]DryLakesRacer (5/29/2020)[/b][hr] I’ve never seen so... By capelo ( 5 Years Ago )

[quote][b]1946international (5/29/2020)[/b][hr] OK so now take it... By capelo ( 5 Years Ago )

This is one of the things I love about this group. A rookie Y-Block... By MoonShadow ( 5 Years Ago )

[quote][b]MoonShadow (6/1/2020)[/b][hr] This is one of the things... By dennis22 ( 5 Years Ago )

MoonShadow, my exact feelings. I couldn't have put it in better words.... By FORD DEARBORN ( 5 Years Ago )

very good guys, thanks for the comments I have a question that I have... By capelo ( 5 Years Ago )

Are you using the electric choke? If so, then there is a screw... By Ted ( 5 Years Ago )

[quote][b]Ted (6/5/2020)[/b][hr] Are you using the electric... By capelo ( 5 Years Ago )

Power for the Choke should be directly from Ignition Switch Accessory... By oldcarmark ( 5 Years Ago )

Capelo, Is that a two-pronged voltage reducer? It looks like you... By NY59F100 ( 5 Years Ago )

[quote][b]NY59F100 (6/9/2020)[/b][hr] Capelo, Is that a... By capelo ( 5 Years Ago )

Hi guys 👋 I haven't written for a long time, I'm still running the... By capelo ( 5 Years Ago )

While those spark plugs appear to be burning cleanly, they still look... By Ted ( 5 Years Ago )

[quote][b]Ted (9/11/2020)[/b][hr] While those spark plugs appear... By capelo ( 5 Years Ago )

It’s usually best to check spark plug coloring immediately after... By Ted ( 5 Years Ago )

[quote][b]Ted (9/12/2020)[/b][hr] It’s usually best to check... By capelo ( 5 Years Ago )

Post Reply

Reading This Topic