Profile Picture

Duraspark dizzy

Posted By deadhead 17 Years Ago
You don't have permission to rate!

Duraspark dizzy

Author
Message
deadhead
Posted 17 Years Ago
View Quick Profile
Hitting on all eight cylinders

Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)Hitting on all eight cylinders (15 reputation)

Group: Forum Members
Last Active: 11 Years Ago
Posts: 15, Visits: 114
I have encountered a slight problem with a Cardon dizzy. Inside it is built just like the Duraspark except for the width of the advance slots and springs. AZ28's conversion delt with the old original Y dizzy parts. Has anyone encountered this and have it figured out yet? Thanks, Tom

last week i couldn't spell mukanik, now i are one

Threaded View

Threaded View
Forum Post Duraspark dizzy By deadhead ( 17 Years Ago )
Forum Post Which kind of advance system? Like the 70's upper rotor shaft on the... By GREENBIRD56 ( 17 Years Ago )
Forum Post [quote][b]GREENBIRD56 (7/2/2007)[/b][hr]
... By JoeBob ( 12 Years Ago )
Forum Post [quote][b]JoeBob (6/11/2012)[/b][hr][quote][b]GREENBIRD56... By NoShortcuts ( 12 Years Ago )
Forum Post Just watch that spring clip as you remove it or install.Travels a LONG... By oldcarmark ( 12 Years Ago )
Forum Post It sometimes takes me a while - Deadhead, are you wanting to put a... By GREENBIRD56 ( 17 Years Ago )
Forum Post AZ28, if you look at the shaft in the lower right of your picture and... By deadhead ( 17 Years Ago )
Forum Post Have you checked out the articles under Tech? I don't know if this one... By MoonShadow ( 17 Years Ago )
Forum Post I hope this picture loads ok. If it does you can see what I mean about... By deadhead ( 17 Years Ago )
Forum Post AZ28, I just took apart my donar duraspark, the slots were marked the... By deadhead ( 17 Years Ago )
Forum Post Moonshadow, I was under the impression that a Load-o-matic was vacume... By deadhead ( 17 Years Ago )
Forum Post Just in case you didn't stumble on to the wiring schematic I used -... By GREENBIRD56 ( 17 Years Ago )
Forum Post Steve, thanks a bunch for helping an old point and condenser guy... By deadhead ( 17 Years Ago )
Forum Post Use the vacuum pot that came with the Duraspark - I believe it has the... By GREENBIRD56 ( 17 Years Ago )
Forum Post Steve, I got the spring kit and went ahead and widened the slot out to... By deadhead ( 17 Years Ago )
Forum Post Deadhead - Got a coil for your hotrod yet? This picture is of a 90's... By GREENBIRD56 ( 17 Years Ago )
Forum Post got any specifics on the 77 duraspark distributor? like what kinda... By 1964fordf100292 ( 12 Years Ago )
Forum Post You want a Motorcraft distributor for a V-8 of that '77+ era - I've... By GREENBIRD56 ( 12 Years Ago )
Forum Post I've spent a little time fooling with my "homebuilt" ignitions over... By GREENBIRD56 ( 12 Years Ago )
Forum Post
NoShortcuts and Oldcarmarc, Thanks for the info, I'll check it... By JoeBob ( 12 Years Ago )
Forum Post Wow!! Glad I took this distributor apart to change the springs. The... By JoeBob ( 12 Years Ago )
Forum Post It may well have two different springs, that is common one may be a... By Talkwrench ( 12 Years Ago )
Forum Post [quote][b]Talkwrench (6/12/2012)[/b][hr]It may well have two different... By JoeBob ( 12 Years Ago )
Forum Post Joe, Many of us use the 10 degree cam or fill the 13 with... By pegleg ( 12 Years Ago )
Forum Post This photo shows an upper rotor shaft that has been modified to... By GREENBIRD56 ( 12 Years Ago )
Forum Post nothing like bringing up an old post! I am going to try this... By unibody madness ( 9 Years Ago )


Reading This Topic

Site Meter