PCV in Rear of Valley Tray

Posted By MattsY 4 Years Ago

You don't have permission to rate!

Author	Message
MattsY	Posted 4 Years Ago
Supercharged Group: Forum Members Last Active: 3 Years Ago Posts: 82, Visits: 3.6K	Anyone ever try one of these adapters to use a PCV valve from the rear breather hole in the valley cover? Yes, it's a road draft conversion for a small block scruby, but it looks like it'll fit nicely!
	Reply Quote

Threaded View

PCV in Rear of Valley Tray By MattsY ( 4 Years Ago )

Is that for an in line pcv ? By PF Arcand ( 4 Years Ago )

Yup, for an inline PCV. This seems very similar to an original Ford... By MattsY ( 4 Years Ago )

I've used these on couple engines. You need to make sure there's a... By miker ( 4 Years Ago )

I have a couple of the Ford ones, but they would not work with the... By 30 coupe ( 4 Years Ago )

ive used them before to make a pcv setup.they are not that hard to... By darrell ( 4 Years Ago )

any i seen juts screwed out from the top By darrell ( 4 Years Ago )

In my valley cover, there was a "stud" that the screw would screw... By 30 coupe ( 4 Years Ago )

Yes, I misused the term "stud". It is a threaded insert for the hold... By MattsY ( 4 Years Ago )

In lieu of removing the hollow stud in that rear hole in the valley... By Ted ( 4 Years Ago )

[quote][b]Ted (7/7/2020)[/b][hr] In lieu of removing the hollow... By MattsY ( 4 Years Ago )