Hi guys i just thought i'd share this with you all, i'm putting together a Yblock for my 32

running twin 4's and a normal valley cover wont fit so i made this one out of S/S it's fixed to the block by M5 set screws around the perimeter, cheers oggie











y block powered mudshark or atomic

Looks good, Oggie...

"The Master Cylinder"

Enjoying life at the beach in SOCAL

Oggie:



You must be down under with that numbers stamping on the front of the block.

marv

It looks like you're using a pair of mismatched heads. It's not a big deal, but you'll have to pull the threaded plug from the front of the head on the left in the picture, and you'll have to plug the rear hole on that same head.


Lawrenceville, GA

Oggie does things a bit different, being upside down and all... besides I see Mummert's heads in his future.

"The Master Cylinder"

Enjoying life at the beach in SOCAL

Your right charlie they are both left hand but both ecg-d, i had to replace one, i've got all the stuff to rebuild them from john but i would love a set of his Alu heads.



Hey Dennis whats new?



cheers oggie







y block powered mudshark or atomic

Oggie, Nothing new here. Where did you get those valve covers with the Ford Oval on them? Something a little different than what we see here.

"The Master Cylinder"

Enjoying life at the beach in SOCAL

Dennis they are THOMAS covers with the name milled out and badges pinned in, a common practice here in the old days, Eddie Thomas was a drag racer, machine shop/ parts manufacturer and all round good egg hes well into his 80's and still has input in to the company. He made 3x2 intakes as well, our friend Maurice (good captain) used to work for him, cheers oggie

y block powered mudshark or atomic

that Ford badge on the cover looks exactly like a door sill plate badge on my 67 mustang!



great looking dual-quad!

This ain't no L-Kamino!

That is a sweeeet set-up. I have something similar I'm working on.

58 Ford Custom 300 - San Pedro, CA (So-Cal)