Been building this for my wife. It's her grandpa's old farm truck. We wanted to make it reliable and fun. Dont copy this as it was just for fun. It'll probably make 215hp. But it'll make fun turbo noises. We have to tidy up the wiring but it's getting close.

Details as follows

Stock rebuilt 62 292. C1TE heads

Sniper 2bbl EFI

Holley Hyperspark distributor modified for YBF.

Holley HyperSpark Coil and CDI box

Walbro 255lph pump in tank.

Ebay radiator, intercooler and BOV

Vintage Air compressor and alternator bracket

Powermaster 160amp 12si. 2.125" pulley, runs aux off the A/c Compressor to increase idle amperage stability. So far 14.6v with all systems on 650rpm

Turbo kit we built from a SBC kit off eBay. Stainless 3/8" Header flanges. All back purged and Tig welded and passavated.

Turbo kit, Turbo and EFI went into our luggage and flown out here with us to Eastern Oregon to install at Grandpa's farm.

My dad drove down and helped a ton, replacing the entire brake system while I worked the engine side of things. Her brother did some welding in the cab and cousins helped on other parts.

The LB on the valve covers is Grandpas brand.

First show is this weekend, then driving the 2500ish miles back to Tennessee.