• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• Mallory distributor

Mallory distributor

Posted By SVMSR1044 5 Years Ago

You don't have permission to rate!

Post Reply

Mallory distributor

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
SVMSR1044	Posted 5 Years Ago
Hitting on all eight cylinders Group: Forum Members Last Active: 5 Years Ago Posts: 7, Visits: 9.8K	Anyone have any experience with a Mallory 2538701, dual point, centrifugal advance distributor on a stock, Fordomatic 292 or 312 Y-block? Good? Bad? Thanks, Steve
	Reply Quote

Threaded View

Threaded View

Mallory distributor By SVMSR1044 ( 5 Years Ago ) Not on a Y and don't know if the same model, but I had a similar dizzy... By paul2748 ( 5 Years Ago ) The Mallory dual points worked quite well back in the day. Much better... By MoonShadow ( 5 Years Ago ) I ran a 50’s distributor with a Mallory dual point plate, external... By DryLakesRacer ( 5 Years Ago ) Steve, I have a dual point mallory #ZC325B tach drive distributor I... By Vic Correnti ( 5 Years Ago ) Steve, Here is a link to some information on the Mallory dual point... By Vic Correnti ( 5 Years Ago ) I assume you can no longer buy these distributors new? I have heard... By Florida_Phil ( 5 Years Ago ) Phil, I haven't used the Mallory for the last 10 years but I was able... By Vic Correnti ( 5 Years Ago ) I have several of the Spalding/Grant flame throwers. Very impressive... By MoonShadow ( 5 Years Ago ) I run a Spalding Flame Thrower in my bird for over 25 years, parts are... By Cliff ( 5 Years Ago ) Near to impossible to find. I need a couple sets of plug wire plates... By MoonShadow ( 5 Years Ago ) E Bay By Cliff ( 5 Years Ago ) Thanks for all who responded, you comments are appreciated. Steve, 56... By SVMSR1044 ( 5 Years Ago ) I have never seen a Spalding/Grant flame thrower. What a device!... By Florida_Phil ( 5 Years Ago ) RE:MALLORY Back in the 60's, we could not get the Mallory dual point... By Tim Quinn ( 5 Years Ago )

Post Reply

Back To Top

Reading This Topic