oil flow

Posted By blocky 6 Years Ago

You don't have permission to rate!

Author	Message
blocky	Posted 6 Years Ago
Supercharged Group: Forum Members Last Active: Last Year Posts: 127, Visits: 2.9K	hi all i am hoping someone can help me with a small problem,on my 272 y block rocker shafts i need to know exactly where to point the oil discharge nozzles at the end of the shafts.pointing down the push rod hole or elsewhere cheers
	Reply Quote

Threaded View

oil flow By blocky ( 6 Years Ago )

The oil holes in the shafts should be on the bottom for the rocker... By Joe-JDC ( 6 Years Ago )

Routed down push-rod hole(s) - [quote] incorect oil flow for... By KULTULZ ( 6 Years Ago )

thank you so much . By blocky ( 6 Years Ago )

cheers thank you By blocky ( 6 Years Ago )

thank you thats what i needed to hear ! By blocky ( 6 Years Ago )

A note on top oiling. According to John at Mummert Machine, all... By PF Arcand ( 6 Years Ago )

.030" seems to stick in mind. From my reading, it seems to me the... By Tedster ( 6 Years Ago )

[quote][b]Tedster (11/12/2019)[/b][hr]So long as there is sufficient... By Ted ( 6 Years Ago )

I agree, no diesel oil in a Y Block. Wrong formula, and will have... By Joe-JDC ( 6 Years Ago )

[quote]Three things not to do: 1) Never discuss politics. 2) Never... By KULTULZ ( 6 Years Ago )

Well, here it is as it happened - Some years ago, the EPA banned... By KULTULZ ( 6 Years Ago )

[quote][b]KULTULZ (11/24/2019)[/b][hr] Well, here it is as it... By BamaBob ( 6 Years Ago )