This year, Ted and I are bringing another Y Block to the EMC.  The rules are quite restrictive this time around, and it will be almost pure Ford Y block.  It is a 292 +.062 and the stroke is 3.310" with 113 iron heads at 10.45:1 compression, Mike Jones camshaft with .591", Mummert dual plane intake, BG 930 DP carb, FPA Thunderbird headers, MSD ignition, belt driven water pump, etc.  We have tried several combination of heads, valve sizes, valve springs, carbs, intakes, spacers, etc., and finally think we have a decent little Y for the challenge.  There will be two 327 scrubys, 2 BB scrubys, 2 FEs, 2 Ford 429/460, Stude, Olds, Buick, Pontiac, 413 Chrysler, 289 SBF. and a couple of others I can't recall.  We are scheduled to run 6th on Monday the 30th.  Any guesses for horsepower and torque?  

Joe-JDC
Joe D. Craine


JDC

These look problematic.
9319-HEADERS: Passenger car chassis style headers required. Header must be manufactured and cataloged to fit a specific passenger car application OEM equipped with the engine type claimed. Manufacturer’s part number must be stamped into the header (better selection for scrubs)
10322-OIL: All engines must be shipped “dry”. Engine will be required to use at least 5 quarts of oil. Participants will only use supplied oil for competition. Propylene Oxide or other oxidizing agents/substances prohibited. Oil is provided at the event. Oil filter must be dry and will be removed for inspection prior to running.
I imagine that cling oil allowed.