I was doing some servicing on my 48 Ford (302, C4) and do to a jack problem broke the sway bar.  The front end is a Mustang II setup.  When I built the car some 30 years ago I used a stock MII sway bar, cut it and splice welded in the middle with a piece of tubing.   It broke at one end of the tubing splice.   It has served me well all these years.  I could re-weld it  guess, but rather not..

Now I ,need a new sway bar.  obviously, It has to be custom made.  Does any one know of some one that can make one up.

THanks


54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ