I was doing some servicing on my 48 Ford (302, C4) and do to a jack problem broke the sway bar.  The front end is a Mustang II setup.  When I built the car some 30 years ago I used a stock MII sway bar, cut it and splice welded in the middle with a piece of tubing.   It broke at one end of the tubing splice.   It has served me well all these years.  I could re-weld it  guess, but rather not..

Now I ,need a new sway bar.  obviously, It has to be custom made.  Does any one know of some one that can make one up.

THanks


54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ

Try Dave at Drop n Stop em.

Durham Missouri

I'm not all that familiar with Mustang 2 front suspensions, other than having a 74 Mustang back in the day, but I know many of the M 2 suspension kit producers offer a sway bar option.  A quick Google led me to Heidts who offer a sway bar option for a 48 for $200.  If the bar mounts on the tubular A arms are the same as yours, it might be a bolt on.  It might be worth a call to see if you can get the dimensions. 

Don

Pretty close to me, and long time acquaintance.  Very capable and high attention to detail.  He was an engineer with Panoz, I think having to do with suspension and / or chassis.

http://tubularfab.com/wp/



Lawrenceville, GA