I have been busting my butt on the getting the bodywork finished so it can be sent off to the painter.  Here are some pictures of the progress.  

I have done some work on the bed sides.  Behind the access door is the control panel for the air load levelers.

Did some work on the bed rails and caps.

The small back window has been removed and...

Replaced with a big one.  :-)

Rust damaged floor panels have been replaced.  I also fixed the forward cab corners due to rust damage.

Cut out for the T5 floor shifter.

Nasty hack job on the dash and a bunch of unnecessary holes that need to be repaired.

A somewhat out of focus picture of the repaired and smoothed out dash.  My fingers are raw from sanding all the nooks and crannies that I wiggled the camera abit when I took this picture.  Now I have to get back out in the garage and get back to work.