Road draft tube

Posted By San Diego Ron 16 Years Ago

You don't have permission to rate!

Author	Message
San Diego Ron	Posted 16 Years Ago
Supercharged Group: Forum Members Last Active: 11 Years Ago Posts: 117, Visits: 243	Just finished adaptor for spin-on oil filter and cleaned and installed new filter in the draft tube canaster but the thing is dripping my just added new 20/50 w oil. Does the new filter need to soak up some oil before it holds it back or should I block off the whole mess and add PCV system...somehow?
	Reply Quote

Threaded View

Road draft tube By San Diego Ron ( 16 Years Ago )

As Paul brought up, you’ll need to verify that the drain back tube... By Ted ( 16 Years Ago )

spin on oil filter adapter? where do i get one?
mummert? T-bird... By davis ( 16 Years Ago )

NAPA has them By Town Vicky ( 16 Years Ago )

You can get new filters for the breather cannister from Tee-Bird... By YukonCor55 ( 16 Years Ago )

NAPA has the road draft filter as well at a very reasonable price.;) By speedpro56 ( 16 Years Ago )

Unibody; Since your engines aren't installed, you might want to... By PF Arcand ( 15 Years Ago )

Where does the draft tube return to on the block what side? Someone... By lrs30 ( 14 Years Ago )

In case you don't catch my other post,the PCV screwed into the intake... By PWH42 ( 14 Years Ago )

[quote][b]PWH42 (10/24/2010)[/b][hr]In case you don't catch my other... By lrs30 ( 14 Years Ago )

Yours is hooked up right.The line from the valve screwed into the... By PWH42 ( 14 Years Ago )