Pressure plate bolts

Posted By Slick111 12 Years Ago

You don't have permission to rate!

Author	Message
Slick111	Posted 12 Years Ago
Turbocharged Group: Forum Members Last Active: 7 Years Ago Posts: 21, Visits: 506	OK what's going on here starting to bolt my pressure plate up to the flywheel on a 292 stock 3 speed flywheel the holes in the fly wheel are nether 1/4 or 5/16 the threads look OK not trashed what size is stock/supposed to be ? 0
	Reply Quote

Threaded View

Pressure plate bolts By Slick111 ( 12 Years Ago )

5/16-18. By Hoosier Hurricane ( 12 Years Ago )

5/16 with 18 per inch but remember that they are grade 8 and not... By 312T85Bird ( 12 Years Ago )

I always go to the parts store and get actual pressure plate bolts.... By lyonroad ( 12 Years Ago )

[quote][b]312T85Bird (10/15/2013)[/b][hr]Flywheel to crank 75 to 85... By Slick111 ( 12 Years Ago )

Machine shop should be able to redrill and tap the P/P holes at... By Oldmics ( 12 Years Ago )

Make sure the bolts are not too long, or the engine will not turn. By Lou ( 12 Years Ago )