|
Group: Moderators
Last Active: 3 hours ago
Posts: 6.1K,
Visits: 438.0K
|
MoonShadow (11/29/2011)
About 2500 for my setup with the 3:80's. ChuckOh, that was at Jeff. For that formula, if you have overdrive, also multiply the overdrive ratio to find the overdrive rpm.
Lawrenceville, GA
|
|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 974,
Visits: 6.2K
|
|
|
Group: Forum Members
Last Active: 47 minutes ago
Posts: 4.5K,
Visits: 37.1K
|
About 2500 for my setup with the 3:80's. Chuck
Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.
 
MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire
|
|
Group: Moderators
Last Active: 3 hours ago
Posts: 6.1K,
Visits: 438.0K
|
Do you actually know how fast the engine is turning at 70?
Lawrenceville, GA
|
|
Group: Forum Members
Last Active: 47 minutes ago
Posts: 4.5K,
Visits: 37.1K
|
I don't know for sure if the 3:25's wouldn't work. Just my experience with the AOD. Chuck
Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.
MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire
|
|
Group: Forum Members
Last Active: 2 days ago
Posts: 813,
Visits: 3.4K
|
If 3.25s wont cut it will 3.55s work.
Butchering up everything I can get my hands on in Dayton Ohio
|
|
Group: Forum Members
Last Active: 47 minutes ago
Posts: 4.5K,
Visits: 37.1K
|
I'm using a AOD behind my Y-Block with a 3.9 gear ratio. The engine turns about 2200 in overdrive at 60-65mph. I'm not sure if the 3.25 will be enough. I plan to put a set of 4:10's in it in the spring. Chuck
Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.
MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire
|
|
Group: Forum Members
Last Active: 2 days ago
Posts: 813,
Visits: 3.4K
|
My 55 presently has a 351 with a wrong cam so I bumped the gears from 2.79 to 3.00 and the motor is spinning more then I thought at 70 on the highway,those gears perked it up some around town but not as much as a I would like so I am thinking about going with 3.25 gears and a AOD with a Lentech valve body. I wanted to got with a FMX so I could use the original type starter but the AOD is starting to sound good so I can have a gear so it will run good around town and go comfortably down the highway.
Butchering up everything I can get my hands on in Dayton Ohio
|