does the motor mount come off without

pulling front dampener?

is there a fix for head around

spark plug holes?

has anybody milled a bigger flat

around spark plug holes?

2 spark plugs still in head

have to scrape off more grunge around

them and try it again

Ford 292 & Fordomatic

removed from '64 F100

For some reason on mine I could not get the the damper on after fitting front mount, had to pull it all apart and do some sort of juggling at the same time. Getting it off may have been the same. Just be more prepared when going to put it back on ..was a PITA !



"Came too close to dying to stop living now!"

As I remember you can not get the front motor mount off a '54 - 56 engine without pulling the harmonic damper. And you don't need to put it back on unless you want to. FoMoCo eliminated the front mount (it is actually called a steady rest) in '57. When I was a lad I put a '57 312 in my '54 and since my buddies and I hadn't any puller we couldn't get the front pully off the '54 engine so we installed the 312 without it. In 50,000 miles there was never any problem.

Doug T

The Highlands, Louisville, Ky.

Damper off 1st then remove steady rest, you will see why. Use 21mm long socket, like a plug socket, it has thin walls and will get into head plug recess to enable better contact with plug. bill

  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia