|
Group: Forum Members
Last Active: 13 Years Ago
Posts: 25,
Visits: 36
|
Can you put different heads on either side of the block? For example, I have a blown C1TE head. Do I have to replace it with another C1TE head?
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 3.6K,
Visits: 496.5K
|
You can use any YBlock head ( 54 excepted because of compatibility problems)and it will fit the block and intake. But you will have to deal with different valve sizes, different compression ratios, different port sizes.
54 Victoria 312; 48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ
|
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 281,
Visits: 1.9K
|
Tim, Explain "blown" most heads can be salvaged with repairs? cheers Warren
 Grizzly (Aussie Mainline)
|
|
Group: Forum Members
Last Active: 13 Years Ago
Posts: 25,
Visits: 36
|
It is leaking from the side.
|
|
Group: Forum Members
Last Active: 13 Years Ago
Posts: 25,
Visits: 36
|
Leaking antifreeze
|
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 281,
Visits: 1.9K
|
Tim, Without seeing the head, that's a lot of corrosion to be leaking. It may be able to be welded. Check with a head shop or engine rebuilder. A replacement C1TE head shouldn't be that hard to find or a set of more desirable heads. You can turn a bad experience into a positive by buying a set of G or 113 heads you'll gain some efficency. cheers Warren
Grizzly (Aussie Mainline)
|