Group: Forum Members
Last Active: 12 Years Ago
Posts: 1.0K,
Visits: 4.5K
|
I need a gas cap for my TBird. Mine wont seal the tank. Any cap is good doesnt have to be NOS or show quality. Thanks
55Birdman Hickory NC
|
Group: Moderators
Last Active: 3 hours ago
Posts: 3.7K,
Visits: 322.2K
|
Earl: I don't know what you mean by not sealing the tank, but a Bird has to have a vented cap.
John - "The Hoosier Hurricane"

|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 202,
Visits: 1.4K
|
Earl , A stock 55 gas tank , takes a special cap , becausr of the number plate bracket , and is also vented..............................Sam........................P.S. ....check is en the mail..!!
56 victoria
|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 1.0K,
Visits: 4.5K
|
John the cap is just on the tank fitting loose and wobbling around. I think it needs to be a bit tighter? It has vibrated off before.
55Birdman Hickory NC
|
Group: Forum Members
Last Active: 50 minutes ago
Posts: 1.7K,
Visits: 144.1K
|
Tricky. Assuming an original cap, you could bend the tangs to make it fit tighter, and/or replace the gasket with a new/thicker one (if it has shrunk/worn thin). But don't lose sight of the fact that the required venting consists merely of two grooves under the gasket. Too much compression on a thick/soft gasket would likely seal them.
6 VOLTS/POS. GRD. NW INDIANA
|