|
Author
|
Message
|
|
ejstith
|
|
|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 494,
Visits: 1.0K
|
When I got mine they were pretty ragged but I polished and polished and finally got them shiny. I painted the grooves with black paint. When done I did regular clear coat but I should have used some kind of heat clear coat. Mine's already sort of bubbling. They still look pretty good.
Doing Fords for 45 years. '56 Customline Victoria
E.J. in Havana FL
|
|
|
|
|
Ted
|
|
|
Group: Administrators
Last Active: 2 days ago
Posts: 7.3K,
Visits: 204.6K
|
Missouri Mike (2/17/2009)
Ted....I notice you're running a heat shield between the exhaust and valve covers. Does that make a big difference???? Those truck exhaust gaskets on my 272 are being used in lieu of the metallic/fiber gaskets that come in the engine rebuild kits. After experiencing some sporadic manifold cracking issues when using the fiber backed gaskets, the all-metal truck gaskets stopped the problem altogether. As far as protecting the valve covers from any excesses in heat radiating from the manifolds, the heat shield portions of the gasket are just a bonus but not particularly necessary.
  Lorena, Texas (South of Waco)
|
|
|
|
|
joey
|
|
|
Group: Forum Members
Last Active: Last Year
Posts: 204,
Visits: 5.3K
|
These are original. I just clean them by hand with a solution of Truegreen, and carefully use a little scotchbrite on the trouble spots. 
|
|
|
|
|
bird55
|
|
|
Group: Forum Members
Last Active: Last Year
Posts: 1.1K,
Visits: 58.8K
|
Theses were professionally polished about 35?? years ago. I've used soap and water, sometimes windex. They are old and grey, just like me. And…just the way I like 'em, with some character.  
A L A N F R A K E S ~ Tulsa, OK
|
|
|
|
|
pegleg
|
|
|
Group: Forum Members
Last Active: 2 Years Ago
Posts: 3.0K,
Visits: 8.7K
|
You can find all kinds of different aluminum polishes at the motorcycle shops, or get a can of polishing compound at the auto store. Gives you something to do when it's too cold to race. Like now.
Frank/RebopBristol, In ( by Elkhart) 
|
|
|
|
|
Missouri Mike
|
|
|
Group: Forum Members
Last Active: 11 Years Ago
Posts: 210,
Visits: 1.2K
|
Ted- I notice you're running a heat shield between the exhaust and valve covers. Does that make a big difference???? Thanks Mo Mike
I'd rather be lucky than good................. but good ain't bad!!
|
|
|
|
|
Ted
|
|
|
Group: Administrators
Last Active: 2 days ago
Posts: 7.3K,
Visits: 204.6K
|
Not clean here but here’s a pic of my engine from a past thread.
The intake and exhaust manifolds are also ceramic coated while both the covers and intake do clean up nicely with either carburetor or brake cleaner. I originally went the ceramic coating route simply because I wanted something that would be maintenance free and it’s definitely been that. The Jet Hot ceramic coating on my roadster headers was extremely bright and shiny for a year until I did a dyno session with them at which point they dulled. The 1300°F-1400°F throwed at them was just too much but a set of covers would never see anything like that.
Lorena, Texas (South of Waco)
|
|
|
|
|
GREENBIRD56
|
|
|
Group: Forum Members
Last Active: Last Week
Posts: 1.7K,
Visits: 102.7K
|
The plating works over on Sixth Ave. in Tucson suggested (1) Powdercoat clear and (2) Chrome Plating (?). They also recommended a local bike shop guy who specializes polishing inside the fins - which I must assume will still be necessary on new Ford covers. My machinist suggested anodizing in gold or other colors - but I would guess this would be best used on an old set. He does this to the custom heat sinks he builds for various aerospace outfits. Anodizing in silver might be a good bet - but it won't be bright.
Steve Metzger Tucson, Arizona
|
|
|
|
|
Johnson Rod
|
|
|
Group: Forum Members
Last Active: 14 Years Ago
Posts: 142,
Visits: 838
|
DANIEL TINDER (2/16/2009)
I used "Zoop Seal" (bought from Eastwood?) on mine after polishing. No staining/corrosion yet after 3 years, but re-application is overdue. It's not cheap or permanent, but bare aluminum always looked best to me. Clear-coat or chrome just not the same. At least NOS aluminum won't be permeated with oil, which I understand can cause paint/coating failure (?).Danial you are correct, Eastwood carries it. I saw it on E-Bay of all places, didn't know Eastwood sold stuff on E-Bay...
Johnson Rod
Southern California
|
|
|
|
|
yehaabill
|
|
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 426,
Visits: 1.4K
|
Y-Guy Jim: Ask Ted, to take a photo, so we all can see.... Bill
Bill Pelham,Al
|
|
|
|