Older Blue Thunder intakes need to be modified to provide clearance for MSD distributors.  Newer ones are machined to provide that clearance.



Lawrenceville, GA

There's no U.S. duty tax for items that cost less than $800.

What machining for distributor? I’m not aware of machining needed on intakes for the distributor. 

It's not Blue Thunder.  It's a simple copy of the B intake, in aluminum.



Lawrenceville, GA

Looks like a B T with heat crossover but from what I see does not have the machining for the aftermarket distributor. Early BT’s don’t either later ones do.

56 Vic, B'Ville 200 MPH Club Member, So Cal.

His name is John, says he is working on a website but can be contacted at JK427@bigpond.com.



Lawrenceville, GA

That’s about $300 US. Shipping and duty (?). Will add something. But if they make production at that price that’s a pretty attractive alternative to the alternatives. Easier to port aluminum too. Was the source listed by name? I don’t do FB.

miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ

I saw this on Facebook, an aluminum copy of the B intake.  Says it should be available in a few months, about 450 AUD (Australia).  Will see if I can get more info.
Should be a nice alternative to stock when the capability of Mummert or Blue Thunder is not required.





Lawrenceville, GA