You need to loan that engine to Tim for his LSR  C/Gas Roadster…

56 Vic, B'Ville 200 MPH Club Member, So Cal.

Thanks for the info.
Ernie

There are couple race transmissions, in rotation for the car.  This particular tranny had 2.20 low.  I think one of the clutch pack seals was faulty, it leaked checked good during assembly. This particular tranny has alot of line pressure 280lbs.  

http://ford-y-block.com 

20 miles east of San Diego, 20 miles north of Mexico

Just curious, is the C4 original to the white T-Bird? If so it was built by TCI for use up to 1000 HP.
Ernie

The engine has been a revolving R&D peice for the last 5 years or so.  Some of the core parts were purchased 5 years ago so prices certainly havent gone down.  Its not a cheap date.

http://ford-y-block.com 

20 miles east of San Diego, 20 miles north of Mexico

What's the price tag on that engine? 

Here’s the link to the post on the Speed Talk forums.

355 y block on the Dyno - Don Terrill’s Speed-Talk

Lorena, Texas (South of Waco)

Thanks! I will check that out.

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

There is quite a bit of information on Speed Talk under the Vintage section about this 355Y build.  The carbs are custom billet three circuit carbs.  You can read on Don Terrill's Speed Talk without being a member.   Joe-JDC 

JDC

I can't tell from the photos what carbs this is running? Anyone?

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK