Group: Forum Members
Last Active: Yesterday
Posts: 549,
Visits: 8.3K
|
Geo56, you are correct, the 56 4 door Victoria uses the higher windshield.
|
Group: Forum Members
Last Active: Yesterday
Posts: 109,
Visits: 4.7K
|
Should you try to sell your 55 tall top windshield, I believe the 56 Victoria 4 door ht. also uses the same tall top windshield. The very tall and narrow vent windows are a giveaway.
|
Group: Forum Members
Last Active: Yesterday
Posts: 549,
Visits: 8.3K
|
Windshild interchange 1955/56 crown vic, 1955/56 convertible, 1956 2 door victoria fairlane, and customline,
|
Group: Forum Members
Last Active: Last Month
Posts: 138,
Visits: 19.3K
|
Thanks for the info. That explains why it doesnt fit, when i bought it the guy told me his dad bought it for his 55 hardtop so i assumed it would fit my crown victoria. I like the clear better also .i dont have sunvisors yet so maybe tinted would help.
|
Group: Forum Members
Last Active: Yesterday
Posts: 109,
Visits: 4.7K
|
The 55 Fairlane 2dr. hardtops were nicknamed " tall tops" by some and were taller than the 55 Crown Victoria and convertible. In 56 , the Victoria 2 dr. ht and the crown were the same height. I would like to add that I checked with Auto City Classic on glass and found that clear windshields and back glass were not available at the time. Only tinted or shaded. I prefer clear and am probably one of the only ones who does..
|
Group: Forum Members
Last Active: Last Month
Posts: 138,
Visits: 19.3K
|
I had to rethink the “wrap around” windshield ,you are right. It must be for a higher roof line like a sedan. Will probably try to find someone who needs a windshield,just have to make sure of the measurements. Thanks
|
Group: Forum Members
Last Active: 4 hours ago
Posts: 3.6K,
Visits: 497.1K
|
52-54 windshield are not wrap around so it isn't that'
I'm not sure, but I believe the 55 Victoria/skyliner/convertible windshields were different than the rest of the 55 line
54 Victoria 312; 48 Ford Conv 302, 56 Bird 312 Forever Ford Midland Park, NJ
|
Group: Forum Members
Last Active: Last Month
Posts: 138,
Visits: 19.3K
|
I took my broken windshield and seal out of my 55 crown victoria and the replacement i bought 10 years ago is the wrong one. My question is where did you get your glass? I know shipping these days is outrageous and only going to get worse( thanks joe) the winshield i took out measures 60” long and 16 1/4” wide. I know the one I was going to install is 58” x 17”. Im thinking its for a 52-54 maybe, im just guessing here.i bought a windshield for my 56 from auto city classics years ago and was well pleased with it. New one for the crown is about $479 with a seal and the shipping. Any advice?
|