Profile Picture

Howards 292002-10 cam

Posted By ogasman 5 Years Ago
You don't have permission to rate!

Howards 292002-10 cam

Author
Message
ogasman
Posted 5 Years Ago
View Quick Profile
Supercharged

Supercharged (126 reputation)Supercharged (126 reputation)Supercharged (126 reputation)Supercharged (126 reputation)Supercharged (126 reputation)Supercharged (126 reputation)Supercharged (126 reputation)Supercharged (126 reputation)Supercharged (126 reputation)

Group: Forum Members
Last Active: Last Year
Posts: 42, Visits: 6.8K
I have a pretty stock 292 going into a 55 Tbird.  ECZ G heads with a 57 Tbird holley 4 barrel manifold.  Will be getting headers and a 4r70w trans behind it.  Just seeing if anybody has run this cam before.  Listed specs are:

Adv duration 255
.050 duration 220
.463 lift
110 lobe separation
106 intake centerline

Does it sound like a decent cam for a weekend cruiser street car?

Thanks
Paul

Threaded View

Threaded View
Forum Post Howards 292002-10 cam By ogasman ( 5 Years Ago )
Forum Post Looks good, but I'd think Howard would want his camshaft back by now. By Tedster ( 5 Years Ago )
Forum Post I had considered this cam and the same cam/w 112 LSA. I contacted... By 55blacktie ( 5 Years Ago )
Forum Post Take a look at the ISKY 301444 cam. I have a 301333 in my Tbird with... By Florida_Phil ( 5 Years Ago )
Forum Post Phil, the 301333 is "bumpy?" Even with 228 degrees duration @ .050, I... By 55blacktie ( 5 Years Ago )
Forum Post [quote][b]55blacktie (12/19/2020)[/b][hr]Phil, the 301333 is "bumpy?"... By Florida_Phil ( 5 Years Ago )
Forum Post I might be comparing apples and oranges, but my brother-in-law's 5.0... By 55blacktie ( 5 Years Ago )
Forum Post Correction! The Clay Smith cam that I mentioned earlier is going into... By 55blacktie ( 5 Years Ago )
Forum Post If your car has/will have power brakes, you'll probably want a wider... By 55blacktie ( 5 Years Ago )
Forum Post I was originally going with a c4 tranny so I put a 3.10 gear in the... By ogasman ( 5 Years Ago )
Forum Post Ogasman, I have a C4/w Dynamic Racing Transmission's wide-ratio gear... By 55blacktie ( 5 Years Ago )
Forum Post A little over stock 292 with a CruiseOmatic an 8.8 with 2.74 is... By DryLakesRacer ( 5 Years Ago )
Forum Post What adapter are you using for 4R70W transmission? Is there sufficient... By 55blacktie ( 5 Years Ago )
Forum Post Long story on the transmission. About 8 years ago I was thinking... By ogasman ( 5 Years Ago )
Forum Post Every year, a 1955 T-bird is entered in our annual downtown car show.... By 55blacktie ( 5 Years Ago )
Forum Post I have had the SOHC for over 20 years. I didn't pay anything near... By ogasman ( 5 Years Ago )
Forum Post Just another option for you, i am using a isky 301974 i got from... By panel driver ( 5 Years Ago )
Forum Post Is that the Cam Mummert calls the '57 + ? By PF Arcand ( 5 Years Ago )
Forum Post Yes i looked at my receipt and he lists it as a 57+ cam. Works really... By panel driver ( 5 Years Ago )
Forum Post Decided to go with the Isky 30-1444. Will I have to make the oil... By ogasman ( 5 Years Ago )
Forum Post I think you meant rocker arms, not lifters. By 55blacktie ( 5 Years Ago )
Forum Post Thanks Fixed it. Paul By ogasman ( 5 Years Ago )
Forum Post [quote][b]ogasman (12/26/2020)[/b][hr]Decided to go with the Isky... By Florida_Phil ( 5 Years Ago )
Forum Post [quote][b]ogasman (12/20/2020)[/b][hr]Long story on the transmission.... By Florida_Phil ( 5 Years Ago )
Forum Post The early Fe equipped pick up trucks used a front mount like the... By ogasman ( 5 Years Ago )
Forum Post Very interesting. To swap an FE engine into an early bird, you need a... By Florida_Phil ( 5 Years Ago )
Forum Post I have a 460 with a C6 in a "57 Bird with the original shifter. Used... By tbirddragracer ( 5 Years Ago )
Forum Post tbirddragracer, I would appreciate more info. on how you set up 57... By 55blacktie ( 5 Years Ago )
Forum Post I will send you some pictures. Ernie By tbirddragracer ( 5 Years Ago )
Forum Post Thanks! By 55blacktie ( 5 Years Ago )
Forum Post Any chance you can post the pictures on this site? I am still working... By ogasman ( 5 Years Ago )
Forum Post Ogasman, was the original Fordomatic T-bird shifter retained when the... By 55blacktie ( 5 Years Ago )
Forum Post Ogasman: J. Mummert re grooves all the Y-block cams he sells. He... By PF Arcand ( 5 Years Ago )


Reading This Topic

Site Meter