i have started to produce a oil pan ad on for rear of the pan,it is thicker than the pan rails,will fit into the rear of the pan  allowing pressure on the rails with washers to press on original bolt holes,we are confident it will eliminate rear pan leakage. as well have started on a better gasket,better than best gaskets.
just made a photo type and once cd growing will proceed. 10 will be avail in early  jan.  gasket and plate.
will sell for 100 us. with hoped for response will make more. those  interested send me your e mail and will send pictures

ct1940@shaw.ca.   mail cliff tate  18030 60th ave surrey bc canada   v3s1v6

Is this for a front-sump or rear-sump oil pan? Has it been tested and proven? Thanks.

will work for front or rear.i have the first photo typ on my 292 for over 1 year.the improved version will have the thicker pan gasket  and is more dence material. the last pan gasket i purchased was terrible  price will be 100.00   canadian for the plate(water cut) 1new thicker pan gasket

I will have to say, I was not aware of rear oil pan leakage being a problem on the Y block... your plan sounds interesting but I do wonder about the market. Maybe some more fellas will chime in here?

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com

rear seal problems ,in many cases are rear of pan gaskets with little or no clap left along withe poor pan gaskets.over tightning rear panbolts distorts the pan rail as well as rear seal career block as it is aluminum,the pan with my bracket  exerts clamping via raised dimples of  pan as well as the washers  attached to bracket between pan bolt holes and bracket. the thicker and more dance pan gasket.

No offense, Meteor, but there seems to be a communication problem.

will have some pictures when our first run comes around end of nov. have some good coments  hear when showing prototype,lots of interest  in pan gasket,dont get them till mid nov. 
just trolling for comments

will have the package ready last week in nov, any canadians interested send me your email address and i will send pictures,have the first 10 plates still waiting for gaskets.  cliff at ct1940@shaw.ca

2 packages spoken for

Like to see what your selling???


54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ