Profile Picture

VIBRATION / NOISE

Posted By oldcarmark 6 Years Ago
You don't have permission to rate!
Author
Message
oldcarmark
Posted 6 Years Ago
View Quick Profile
Supercharged

Supercharged (6.1K reputation)Supercharged (6.1K reputation)Supercharged (6.1K reputation)Supercharged (6.1K reputation)Supercharged (6.1K reputation)Supercharged (6.1K reputation)Supercharged (6.1K reputation)Supercharged (6.1K reputation)Supercharged (6.1K reputation)

Group: Forum Members
Last Active: Yesterday
Posts: 3.7K, Visits: 32.4K
My Car has developed a Vibration / Noise in the last 2 Weeks. Its a light Vibration with a "drumming" Noise that repeats louder/ lighter. The Vibration is through the Floor not Steering. I have checked Brakes for Drag and Tires for Separation ( Radials). I pulled the Driveshaft Today to make sure new U-Joints were not tight and rotate freely and balance Weights are in Place. Motor / Transmission  Mounts are new and Tight.  The Vibration/Noise is diminished if I shift to Neutral . The only change I made recently was new Standard Mufflers and some Pipe bending. Nothing is touching the Frame. Any Suggestions?

http://forums.y-blocksforever.com/Uploads/Images/a82cee8f-be33-4d66-b65d-fcd8.jpg  http://forums.y-blocksforever.com/uploads/images/339ed844-0bc3-4c73-8368-5dd3.jpg

Threaded View

Threaded View
Forum Post VIBRATION / NOISE By oldcarmark ( 6 Years Ago )
Forum Post Not sure but dual exhaust at least on my '55 routes through openings... By Meandean ( 6 Years Ago )
Forum Post Check your motor mounts/bushings for a broken mount or a cracked... By Joe-JDC ( 6 Years Ago )
Forum Post [quote][b]Joe-JDC (7/19/2019)[/b][hr] Check your motor... By oldcarmark ( 6 Years Ago )
Forum Post Have you checked diff pinion and extension housing bushing for... By ian57tbird ( 6 Years Ago )
Forum Post The Diff is fine. Fordomatic. Should there be basically no Play where... By oldcarmark ( 6 Years Ago )
Forum Post How about the torque converter bolts? Also if you don't have the later... By MoonShadow ( 6 Years Ago )
Forum Post Does it completely go away when shifting to neutral? If not i am... By panel driver ( 6 Years Ago )
Forum Post [quote][b]MoonShadow (7/20/2019)[/b][hr] How about the torque... By oldcarmark ( 6 Years Ago )
Forum Post Never hurts to recheck the converter bolts though. By MoonShadow ( 6 Years Ago )
Forum Post [quote][b]MoonShadow (7/20/2019)[/b][hr] Never hurts to recheck... By oldcarmark ( 6 Years Ago )
Forum Post Have you checked wheel balance ? By Lou ( 6 Years Ago )
Forum Post No. Usually if a front Tire is bouncing it is felt through Steering.... By oldcarmark ( 6 Years Ago )
Forum Post i had to chase down a similar noise years ago and it turned out that... By blocky ( 6 Years Ago )
Forum Post I chased a similar vibration for a long time going through everything,... By 57RancheroJim ( 6 Years Ago )
Forum Post [quote][b]57RancheroJim (7/20/2019)[/b][hr] I chased a similar... By oldcarmark ( 6 Years Ago )
Forum Post What about a rear tire out of balance or out of round, or bent rim?... By Lou ( 6 Years Ago )
Forum Post [quote][b]Lou (7/20/2019)[/b][hr] What about a rear tire out of... By oldcarmark ( 6 Years Ago )
Forum Post Reading through this string I have a couple of ideas that might help;... By Roy ( 6 Years Ago )
Forum Post Thanks Roy. I did pull the Driveshaft and verify U-Joints were moving... By oldcarmark ( 6 Years Ago )
Forum Post Sounds like a good place to start. Maybe just by wedging it you'll... By Roy ( 6 Years Ago )
Forum Post Check that there is not excess movement or slop in the rear... By Ted ( 6 Years Ago )
Forum Post I did have a look at the Yoke when I had it out. If there was... By oldcarmark ( 6 Years Ago )
Forum Post My bushing was worn but not through to the cast housing metal and the... By 57RancheroJim ( 6 Years Ago )
Forum Post [quote][b]57RancheroJim (7/22/2019)[/b][hr] My bushing was worn... By oldcarmark ( 6 Years Ago )
Forum Post I am going to have the Car up on a Hoist Thursday so I will get a... By oldcarmark ( 6 Years Ago )
Forum Post [quote][b]oldcarmark (7/24/2019)[/b][hr] I am going to have the... By 57RancheroJim ( 6 Years Ago )
Forum Post The fact that it changes Could indicate the pipes are contacting... By pegleg ( 6 Years Ago )
Forum Post I had it back to the Shop that did the Exhaust. There's no Contact... By oldcarmark ( 6 Years Ago )
Forum Post [quote][b]pegleg (7/26/2019)[/b][hr] The fact that it changes... By oldcarmark ( 6 Years Ago )
Forum Post Check your fan belts for tightness, and see if any accessory pulley is... By Joe-JDC ( 6 Years Ago )
Forum Post [quote][b]57RancheroJim (7/25/2019)[/b][hr] [quote][b]oldcarmark... By oldcarmark ( 6 Years Ago )
Forum Post [quote][b]oldcarmark (7/27/2019)[/b][hr] [quote][b]57RancheroJim... By 57RancheroJim ( 6 Years Ago )
Forum Post Thanks Jim. That's much higher MPH than I am having Vibe at. 35-50.... By oldcarmark ( 6 Years Ago )
Forum Post [quote][b]oldcarmark (7/28/2019)[/b][hr] Thanks Jim. That's much... By 57RancheroJim ( 6 Years Ago )
Forum Post I wanted to Update My Post. I had the Wheels balanced Twice. 2... By oldcarmark ( 6 Years Ago )
Forum Post Could the harmonic balancer be the issue By 55 GLASS TOP ( 6 Years Ago )
Forum Post Mark, have you done the latest test with the fan belts off? You gotta... By Hoosier Hurricane ( 6 Years Ago )
Forum Post [quote][b]Hoosier Hurricane (8/27/2019)[/b][hr] Mark, have you... By oldcarmark ( 6 Years Ago )
Forum Post Sorry I was thinking out loud did not read all your post By 55 GLASS TOP ( 6 Years Ago )
Forum Post [quote][b]Hoosier Hurricane (8/27/2019)[/b][hr] Mark, have you... By 57RancheroJim ( 6 Years Ago )
Forum Post [quote][b]Hoosier Hurricane (8/27/2019)[/b][hr] Mark, have you... By oldcarmark ( 6 Years Ago )
Forum Post Have you tested it in different gears to see if it is the RPM or the... By ian57tbird ( 6 Years Ago )
Forum Post If you did not reinstall it in the same position, then turning the... By charliemccraney ( 6 Years Ago )
Forum Post [quote][b]charliemccraney (8/30/2019)[/b][hr] If you did not... By oldcarmark ( 6 Years Ago )
Forum Post [quote]If I disconnect the Converter from Flex Plate can I run the... By KULTULZ ( 6 Years Ago )
Forum Post [quote][b]KULTULZ (8/31/2019)[/b][hr] [quote]If I disconnect the... By oldcarmark ( 6 Years Ago )
Forum Post Could it be that it is not firing on one cylinder completely and it... By ian57tbird ( 6 Years Ago )
Forum Post [quote][b]ian57tbird (8/31/2019)[/b][hr] Could it be that it is... By oldcarmark ( 6 Years Ago )
Forum Post [B]Lisle 19380 Spark Tester[/B] By KULTULZ ( 6 Years Ago )
Forum Post I don't have that Tool but a Induction Timing Light which I have would... By oldcarmark ( 6 Years Ago )
Forum Post Mark, Sometimes the most obvious thing is the hardest and... By pegleg ( 6 Years Ago )
Forum Post [quote][b]pegleg (9/3/2019)[/b][hr] Mark, Sometimes the... By oldcarmark ( 6 Years Ago )


Reading This Topic


Site Meter