|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 29,
Visits: 17.6K
|
So this happened. My fault, bolt was too long. What is going to be the best way to address this? Will the bell housing hold with just 3 secure bolts? Any advice would be great!  
DiLL
|
|
Group: Forum Members
Last Active: 4 hours ago
Posts: 863,
Visits: 13.3K
|
Weld it, an easy job
|
|
Group: Administrators
Last Active: 2 Weeks Ago
Posts: 7.4K,
Visits: 205.0K
|
Four bolts are marginal for bellhousing retention so you need all four. The broken piece can be welded back on but needs to be performed with a bolt in the hole to insure thread alignment. That hole might require a helicoil if the threads miss a little bit. Another fix is to weld up the broken area solid and then redrill the bellhousing hole.
  Lorena, Texas (South of Waco)
|