Y block clutch recommendation

Posted By willys392 6 Years Ago

You don't have permission to rate!

Y block clutch recommendation

Author	Message
willys392	Posted 6 Years Ago
Supercharged Group: Forum Members Last Active: 4 Years Ago Posts: 19, Visits: 1.8K	I'm building a 56 F100 with a 292 and T5 transmission. I have both a 10" and 11" flywheel. It's more a hot rod truck rather than a work truck. Which would be best for the street. thanks Bill
	Reply Quote

Threaded View

Threaded View

Forum Post

Y block clutch recommendation By willys392 ( 6 Years Ago )

Forum Post

Probably 11" for more options. Make sure the flywheel is not cracked.... By charliemccraney ( 6 Years Ago )

Forum Post

thanks Mr. C I have the bellhousing already modified and I have John's... By willys392 ( 6 Years Ago )

Forum Post

You will have more options using the 11" pattern so that's the one you... By charliemccraney ( 6 Years Ago )

Forum Post

roger that. I guess some early FE clutches will work. eg. 63 Galaxie... By willys392 ( 6 Years Ago )

Forum Post

sorry, that should be 406, not 352. Luk clutch set at Napa. By willys392 ( 6 Years Ago )

Forum Post

I'm using an 11" flywheel with a Centerforce clutch and pressure... By Rono ( 6 Years Ago )

Forum Post

Go to Summit's site, select all of the requirements and see your... By charliemccraney ( 6 Years Ago )

Forum Post

I also have the Centerforce dual friction clutch behind the 312 in... By paul2748 ( 6 Years Ago )

Forum Post

I'd go with the 11". Use a diaphragm style pressure plate ( '62 406... By Lord Gaga ( 6 Years Ago )

Reading This Topic