|
Group: Forum Members
Last Active: Last Year
Posts: 3.3K,
Visits: 238.8K
|
First time - If you haven't done one on a Ford Y- Block before, best link from here to Ted Eaton's Eaton Balancing site & go to his seal instalation page. A rear seal done wrong will likely be a worse leaker than you have now!.. Original factory seals aren't available usually, so one company that makes later ones is Best Seal..
Paul
|
|
Group: Moderators
Last Active: Yesterday
Posts: 6.1K,
Visits: 441.6K
|
Plenty of room in a truck, easy to remove the pan.
Lawrenceville, GA
|
|
Group: Forum Members
Last Active: 2 Years Ago
Posts: 236,
Visits: 237.6K
|
If I remember correctly the trucks used a rear sump pan so axle clearance should not be a problem so yes the seal can be replaced in the vehicle.
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 3.6K,
Visits: 497.5K
|
You can do it in a TBird, probably a sedan but may have the axle in the way with a F100. Check a truck shop manual, they may have the procedure to remove it..
54 Victoria 312; 48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ
|
|
Group: Forum Members
Last Active: Last Year
Posts: 464,
Visits: 183.3K
|
In a word, yes.
"FREE SAMPLE"
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 7 Years Ago
Posts: 1,
Visits: 222
|
Hi
have an oil drip from the rear main seal on a F 100 y block 272 cui would like to know if there is anybody here in the panel as if seal could be replaced without taking engine and crank out
|