Looking for a Valley Pan in good shape and reasonable Price. Want to install PCV so need One with rear Opening and Baffle.. 

  

FWIW, I’ve used this with success on stock motors. Didn’t work so well with the blower and high volume oil pump at high rpm. But you can install it in a valley pan without the rear draft opening.

https://www.amazon.com/Moroso-68776-Valve-Grommet-Baffle/dp/B001G9FRKC

miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ

Here's one off a '52 292 - https://www.ebay.com/itm/60-61-62-63-64-FORD-272-292-312-Y-BLOCK-ENGINE-MOTOR-INTAKE-VALLEY-PAN/132807418986?epid=1323297676&hash=item1eebf0646a:g:-9oAAOSwty5btR1o&vxp=mtr

____________________________

I have one, good shape but needs a good cleaning and painted.$40.00 plus shipping from Ohio    Carl

Thanks Mike for the Heads up about these Grommets. I was not aware these are available. I want to use it in the Valley Cover as opposed to Valve Cover as I have a set of the Original Thunderbird Covers.

  

Thanks for the Offer Carl. Fair Price. My problem is shipping Cost to Canada which USPS is charging an Arm & a Leg now. I am going to try the Grommet that Miker pointed out. Stock Motor so I think should work OK.

  

Sorry Mark, I should have noted that I used it in the valley cover at the rear location. I’ve got the ‘bird valve covers too.

miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ

I got a TBird valley pan in excellent condition ready to install, but the shipping thing would still be a problem.

You need a shipping address near the border so you could cross over.


54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ

ship by mail same price as you would pay in canada.never use any of the others.i can mail a part to florida  for the same price as i can ship to ontario.

I have an extra Valley Cover from the last Time I did this. Going to try the Grommet Miker pointed Me to. Thanks Guys.