Hitting on all eight cylinders
Group: Forum Members
Last Active: 7 Years Ago
Posts: 6,
Visits: 77
|
Hi All,
Can someone tell me the bolt and thread size on the harmonic balancer. Trying to remove one of a 272. Both my pullers don't have the right sized bolt.
Any help appreciated.
Thanks
|
Group: Forum Members
Last Active: 2 Months Ago
Posts: 1.3K,
Visits: 80.0K
|
Try a 9/16"-24 Rono
Ron Lane, Meridian, ID
|
Group: Moderators
Last Active: 6 hours ago
Posts: 6.0K,
Visits: 387.4K
|
For pulling, 3/8" coarse thread. The threads often get filled with grime, which make it difficult to thread the bolt.
Lawrenceville, GA
|
Group: Forum Members
Last Active: 2 Years Ago
Posts: 120,
Visits: 33.3K
|
I believe the bolt size for all Y-Blocks (272-312) is 9/16-18 x 1 3/4".
|
Group: Moderators
Last Active: 6 hours ago
Posts: 6.0K,
Visits: 387.4K
|
The bolt for fixing the damper to the crank and threads used for installing the damper is 9/16-18. The threads for removing the damper (the subject of this thread) and holding accessory pulleys are 3/8-16
Lawrenceville, GA
|