Hitting on all eight cylinders
Group: Forum Members
Last Active: 8 Years Ago
Posts: 6,
Visits: 52
|
Anyone looking for a good running 312 out of 56 Ranch Wagon? I've been putting around 40 miles a day on it. I just installed a pertronix ignition, but think I'm going with another 4.6 swap. The three speed shifts ok, does a little pop when you take off from a stop. Has OD, but the wires leading to it are not hooked up. 
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 8 Years Ago
Posts: 6,
Visits: 52
|
I was looking for around 600 for the combo
|
|
Group: Forum Members
Last Active: 8 Months Ago
Posts: 1.3K,
Visits: 80.0K
|
Where are you located?
 Ron Lane, Meridian, ID
|
|
Group: Forum Members
Last Active: Last Week
Posts: 813,
Visits: 3.4K
|
That is just what I am looking for.
Butchering up everything I can get my hands on in Dayton Ohio
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 8 Years Ago
Posts: 6,
Visits: 52
|
I'm in Springfield IL
|
|
Group: Forum Members
Last Active: 8 Months Ago
Posts: 1.3K,
Visits: 80.0K
|
Too far for me....go for it Jeff!
Ron Lane, Meridian, ID
|
|
Group: Forum Members
Last Active: 2 Weeks Ago
Posts: 1.8K,
Visits: 183.3K
|
Not trying to cause trouble either, but if's a factory 312, it should have a T-85 0/d trans. In 56, I think the 292's were still T-86's. Google them, you'll see the difference in the side cover.
miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ
|
|
Group: Forum Members
Last Active: Last Year
Posts: 1.4K,
Visits: 179.6K
|
Yup. Even if it was originally equipped with a 312 from the factory, that's now sixty (60!) years ago. I'm glad that there's a group like this that appreciates this stuff. 
NoShortcuts
a.k.a. Charlie Brown
near Syracuse, New York
|
|
Group: Forum Members
Last Active: Last Week
Posts: 813,
Visits: 3.4K
|
I would still be interested in it even if its a 292.
Butchering up everything I can get my hands on in Dayton Ohio
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 8 Years Ago
Posts: 6,
Visits: 52
|
The three speed does have OD, but the solenoid has been unhooked. When the oil pan was dropped awhile back, it had the ecz main caps stamped in. From what I've read, that and a flange on the crank are about the only way to tell. And these ultra sweet badges on the front fenders. 
|