Group: Forum Members
Last Active: 10 days ago
Posts: 224,
Visits: 555
|
As I shipping of these Toyota pro fab nascar headers to an Aussie fabricator . I thought to myself . Looks like an easy adapt to yblock . Account the slip fit design . Easy reweld on the flanges . These headers can be made shorter or longer . I would be interested doing some if there was an interest . I also a vendor at the PRI show in Indy . Talked with a few high tech aluminum sand casting companys . For reversible high flow .water pump and cam cover . These headers have 1 7/8ths primaries stepped to 2" all flowed , weigh less than 30 lbs ,can put oval outlets for low clearance . I keep 10 sets in stock .
Po ol DavieSparta , Tn.
|
Group: Forum Members
Last Active: Last Week
Posts: 1.8K,
Visits: 183.3K
|
That's an interesting idea, but which of our applications are they going to fit? Typically, the pass side is easier, but on the driver's side the steering box, the clutch Z bar, sometimes the oil filter, are a clearance problem. The motor mounts play into this also.
miker 55 bird, 32 cabrio F code Kent, WA Tucson, AZ
|
Group: Forum Members
Last Active: 10 days ago
Posts: 224,
Visits: 555
|
These are for the hardcore builder and racer . I am always thinking up and making things work better .
Po ol DavieSparta , Tn.
|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 687,
Visits: 9.3K
|
miker (12/24/2015)
That's an interesting idea, but which of our applications are they going to fit? A dragster aplication. A passenger car's steering gear and that 8. And 7. Cylinder's long bends doesnt seem to fit with together but headers otherwise looks quite nice.
Hyvinkää, FI
|