Glen,

I need a passenger car oil pan with complete pickup tube from bottom of pan to oil pump.

I live in eastern Nebraska. Any idea on the freight cost?
JIm
402-681-1770 cell phone
mjrowe@cox.net


  Jim Rowe Elkhorn, NE

I am sure that I have another slinger, as Ted said in the other post, I don't know what spacer you are talking about. The camshaft drip thing was deleted on later Y blocks and most don't use them. I'll dig around and see if I have the slinger.

Glen Henderson



Freedom is not Free

Letohatchee, AL

For a 292 am looking for the can shaft oil drip trough and for the crank shaft needing the spacer and oil slinger.  Got long block
and it seems to be missing these parts.  Does the crank need both a spacer and slinger on the 292?

Im looking for a ecz-b intake and a set of 312 heads for my 292  phone 406-698-0489 thanks Dave

Again I can not receive PM's from this site, so email me at rebelrousergarage.com, I have moved a lot of parts, but have a lot more. If I have not replied to your request send me another email. Thanks Glen.

Glen Henderson



Freedom is not Free

Letohatchee, AL

Let me see if I can answer some questions in one post, I do appreciate all the response.
All the B intakes are sold, I do have a couple of A's $75 ea.
I don't have any 312 rods that I would use.
I have 2 sets of G heads left, but I would suggest having them checked for cracks 1 SET SOLD
I have a real nice 57 breather, and a nice 56 breather
I have a couple standard flywheel covers from pickups, but I don;t no if they will fit a Tbird for the gentleman from Cali.
I have some loose 1.53 ratio rockers
I have one set of 1.53 rockers with new shafts with Ted Eaton's oiling mods $175 shipped
I don't have a oil bath air  cleaner that will fit a four barrel
I have valve covers and valley pans, road draft tubes ect.

I will try to get pictures out this weekend to those of you that I promised pictures too

Glen Henderson



Freedom is not Free

Letohatchee, AL

Glen, I don't think I will need an air cleaner after all. I thought the one I have was from a 58 or 59 but it is actually from a 57.


~DJ~ AKA "Bleach"
1956 Ford Fairlane Town Sedan 30K original miles

Glen,  Sent you a PM.

OK guys give me a little time and I will get back to all of ya'll, I work at the NAPA store Mon and Thues so it will be Wed before I can start digging through this stuff. I will try to send each of you a PM, but for some reason I can;t receive PM's. If I send you a reply, you may want to call or email me. Thanks, Glen

Glen Henderson



Freedom is not Free

Letohatchee, AL

Greetings Glen:  I need a usable set of 312 connecting rods. I also sent an e-mail with the same request. Thanks, JEFF.........


64F100 57FAIRLANE500