I am looking for two of the longer head bolts that go under the rockers. One of my heads came with them all the same size, a 1/4 inch shorter than the outer two are supposed to be.
Thanks
John

I think I've got those. I'll check tomorrow.


Marc

'54 Merc ragtop

Pt Townsend, WA   

                                                                                                                                   

All the ones I have are either 5" or 2 1/2".


Marc

'54 Merc ragtop

Pt Townsend, WA   

                                                                                                                                   

John  If you have a Fastenal store close to you they have grade 8 bolts,I used them on my engine when it was rebuilt.If I remember right I had to cut a little off as they didn't have exactly the right length 

John:Keep in mind that the Fastenal bolts will have 5/8" hex heads, the originals have 11/16" hex.  Will require two different size sockets to torque the head.  I'm sure I have some used originals in my stash, let me know if you don't fine anything.

John - "The Hoosier Hurricane"

i just went to a cat dealer for 4 of the longer 1s,they ar grade 8 and 1/4 longer. cliff

Thanks guys. after I torqued the right side with the correct bolts, the left side felt sketchy with only the shorter bolt in all five holes

Still looking for those bolts

Give me your mailing address and I'll send you a couple.  They are used ones.

John - "The Hoosier Hurricane"