I never thought to ask this before, but since I put stock springs back in my 56 this winter (the old ones were cut down) I was planning on having it aligned again. The shop manual says for stock 56 Ford spindles the specs are as follows;

Caster Camber Toe In

Max-1&1/2 Max-1&1/4 1/16" - 1/8"
Min- 1/2 Min- 1/4

So, my question is, with mid 70's 2&1/2" dropped Granada spindles, do the alignment specs change??

Rono

  Ron Lane,  Meridian, ID