truck on the dyno yesterday. There were/are several things that still need work(fuel pump,o/2 gauge,

changing to E85, etc) but it put out some decent #'s after he played around with it.

               Air temp 85 degree's, inlet temp at turbo(no intercooler) 259 degree's and 60% humidity

it made 468 ft lbs (rear wheel) @ 4500rpm and 402hp @ 4500rpm. I was "Happy" to say the least

and Reed says with a litle more fine tuning and maybe with E85 it should do better...I drive this

thing a lot, so I'm not going with any radical changes....

                                                              Bill

We couldn't rpm more than 4500/4700 because lack of fuel pressure...

Bill

Pelham,Al