I need a set of 15 x 8" slots, 3" BS, 5x41/2 bolt pattern.

I would also consider a set of 8" steel wheels in good condition with 3" BS.  I have a full set of 14" slots with pretty decent tires (big and littles) that I would trade for the right rear wheels. Perfer 3" BS, but might condider 3 1/2". I have got to get those funkie bullet holes off the Falcon.

Glen Henderson



Freedom is not Free

Letohatchee, AL

I found these on craigslist

http://rochester.craigslist.org/pts/2437823387.html

http://buffalo.craigslist.org/pts/2468891072.html

http://binghamton.craigslist.org/pts/2445669155.ht

http://york.craigslist.org/pts/2488808917.html   (Unilug?)

Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Glen:

There are always all sorts of wheels, new and used, on Racingjunk.com

John - "The Hoosier Hurricane"

Thanks John and Chuck, I check all those sites on a regular basis. The problem is finding the 3'' backspacing. Some guy in CA has what I'm looking for, but I'm not going to pay $1000 for a set of used wheels. Just thought someone might have some stuck back that does not think they are made of gold.

Glen Henderson



Freedom is not Free

Letohatchee, AL

True for a lot of items today. And watch out for the shipping fees! I had 5 aluminum wheels for my 85 Mercedes shipped from NJ and the cost, at the post office, was under $50. I've seen sites trying to get more than that for one wheel. Hooks and Crooks. Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Glenn, I have a pair of american slots, 10in wide with a 3in backspacing. They came on the blue `74 pinto that we also race. I was looking for fronts like yours for the longest time. I ran 29.5 by 10.5 tires on them, there just sitting in the corner now. I could bring them to Columbus and we could talk. (got any thing I could trade for?)

Greg Dietrich Mt.Morris Il

Greg:

What is the front spacing on those wheels, 6"?  Are they made such that they can be mounted backward?  I need 6" backspace for my car.  If those are 3" back space plus 1" thick hub, they would be 6" on the front, wouldn't they?  My present 10" steelies are incredibilly heavy.

John - "The Hoosier Hurricane"

Too bad I had to get my money back on the ones I picked up at columus last year, you could hold a rear tire out straight in your arm they were so light, almost fit but I didn't feel like rolling my wheel wells. they were only $300 or $320 if I remember right, they did need new rubber though in the rear. Thinking back I should have kept them and made them work, I'll probably never find that kind of deal again.

55 Vicky & customline

58 Rack Dump, 55 F350 yard truck, 57 F100

59 & 61 P 400's, 58 F100 custom cab, 69 F100, 79 F150, 82 F600 ramp truck, 90 mustang conv 7 up, 94 Mustang, Should I continue?

Greg that sounds like something that I could use! I have a set of new in the box centerline style skinnys that I don't need or several sets of non posted G's, I also have a extra nice set of 113's. Let me know what you need or put a price on them. I can get pic's if you see something that interest you.

Glen Henderson



Freedom is not Free

Letohatchee, AL

Glenn, I pulled those wheels out of the corner, double checked, they are 3 1/2" back space. John, they look pretty crude from the back side. Spokes and ribs, nothing like the front.

Greg Dietrich Mt.Morris Il