I am about to replace the front crossmember  on a 56 Victoria and will rebuild the front suspension during the teardown. I plan to examine , clean and reuse what is good and replace shocks and bushings for sure. While the ball joints and tie rods have fittings for lubrication, I have found no info in the shop manual as to where to lubricate the control arm bushings or the upper shafts. Should I drill the bushings and screw in grease fittings or just grease the shafts and crossmember bolts the the bushings spin on. I did a rebuild on another 56 Fairlane years ago and It was squeaky a year or two later..    George