Cam Grind Question - Isky S-969

Posted By BamaBob 3 Years Ago

You don't have permission to rate!

Author	Message
BamaBob	Posted 3 Years Ago
Supercharged Group: Forum Members Last Active: Today @ 3:55:30 AM Posts: 153, Visits: 11.2K	Ted, which would be the best lobe center grind for the S-969 Isky cam installed in a 312 engine mated to a 1955 Fordomatic Transmission? Also, would a .030 deep center groove be enough for good oil flow to the top? Thanks.
	Reply Quote

Threaded View

Cam Grind Question - Isky S-969 By BamaBob ( 3 Years Ago )

For a F-O-M tranny, 112° lobe centers will work well. Install the... By Ted ( 3 Years Ago )

Ted, I know that in the past you have ground a groove in the block... By bird55 ( 3 Years Ago )

I continue to machine the groove into the block behind the center cam... By Ted ( 3 Years Ago )

As a general rule, I specify two degrees of cam advance when custom... By Ted ( 3 Years Ago )

Thanks, Ted. I was just wondering about different installation... By BamaBob ( 3 Years Ago )