• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• Over bore

Over bore

Posted By Kahuna 7 Years Ago

You don't have permission to rate!

Post Reply

Over bore

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
Kahuna	Posted 7 Years Ago
Supercharged Group: Forum Members Last Active: 6 Years Ago Posts: 471, Visits: 2.4K	Re the thread by Mr. Quinn What is the max overbore for a 312 block? And also a 292? If one has a good 312 block, what is the max cubic inch possible? Thanks Jim
	Reply Quote

Threaded View

Threaded View

Over bore By Kahuna ( 7 Years Ago ) Maximum overbore will vary from one block to another. If you're going... By charliemccraney ( 7 Years Ago ) Good question. I’ve always sonic checked the block, and I’ve done 2... By miker ( 7 Years Ago ) .A note from Ford, they only made pistons for 312 s up to 40 thou... By PF Arcand ( 7 Years Ago ) Thanks so much Jim By Kahuna ( 7 Years Ago ) I'm .80 over with Egge cast pistons and trouble free. MIKE By famdoc3 ( 7 Years Ago ) As mentioned from a bunch of guys: sonic check the block. That’s about... By Kev ( 7 Years Ago ) Mike: Was your block sonic checked before the 80 thou overbore? And... By PF Arcand ( 7 Years Ago )

Post Reply

Back To Top

Reading This Topic