I have a dilemma (sp)?
Hopefully, one of you smart guys can help.
The heater control located on the dash has 2 levers,
not counting the heater fan switch. Originally, there 
would have been 3 cables attached to the lever assy.
Mine has only 2. The missing cable end on the 
control side has a nub with a vacuum line attached. 
That line is cut and about 4" is left.
Doing some research in the manual, it seems there is
supposed to be a vacuum line (the cut off one), that
goes, or would go to something called a vacuum control 
valve (don't have the book handy at the moment).
My valve is missing, as is the cable.
I'm sure I can get the correct cable and "maybe" the control 
valve, but cannot figure out the operation of this stuff and 
the manual isn't clear at all.
Has anyone had some experience with this stuff? I sure could 
use some help.
If my ramblings aren't clear, please ask appropiate questions
and I'll try to provide better explanations.
I've got the dashboard out and am doing all I can to fix this
mess I bought.
It is absolutely unbelievable what people will do to jury-rig
something to make stuff work.
Sorry for being long-winded, hope somebody can help
Thanks
Jim