• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• preparing to adjust steering box-"worm and roller mesh adjustment

preparing to adjust steering box-"worm and roller mesh adjustment

Posted By texasmark1 9 Years Ago

You don't have permission to rate!

Post Reply

preparing to adjust steering box-"worm and roller mesh adjustment

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
texasmark1	Posted 9 Years Ago
Supercharged Group: Forum Members Last Active: 6 Years Ago Posts: 650, Visits: 2.7K	can this adjustment be performed with the front wheels in place and on the ground? any suggestions on doing this the "right" way? thanks,Mark "God Bless Texas"location: Houston,TX
	Reply Quote

Threaded View

Threaded View

preparing to adjust steering box-"worm and roller mesh adjustment By texasmark1 ( 9 Years Ago ) That can be done on ground ,but how is your worm bearing preload? Some... By tomfiii ( 9 Years Ago ) This is from my '55 Merc shop manual (paraphrased): Remove the pitman... By Dobie ( 9 Years Ago ) I've checked everything underneath and it is all surprisingly tight... By texasmark1 ( 9 Years Ago ) Control arm bushings don't have much direct effect on the linkage and... By Dobie ( 9 Years Ago ) small increments is right! got some tightness restored to the... By texasmark1 ( 8 Years Ago ) Good deal. I know the Deer Park/Pasadena area pretty well, it was part... By Dobie ( 8 Years Ago )

Post Reply

Back To Top

Reading This Topic