|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 17,
Visits: 67
|
|
|
Group: Administrators
Last Active: 2 days ago
Posts: 7.3K,
Visits: 204.6K
|
Your pictures are not clear enough to see the problem you are observing. If the rocker stands are not physically broken and/or cracked, then they should be okay to reuse. Be sure the stands are installed on the shafts such that the stand part number is on the bottom when bolting them to the heads.
  Lorena, Texas (South of Waco)
|
|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 17,
Visits: 67
|
In those slots is a 1/16" hole through to the bolt on each slot. So oil would also go to the rocker stand bolt because the sidewall has a hole in it
|
|
Group: Moderators
Last Active: 2 hours ago
Posts: 6.1K,
Visits: 437.9K
|
No more oil than usual will get by given the slip fit nature of the components. Most of the oil will be within the shaft itself and not the stands.
Lawrenceville, GA
|