|
Group: Forum Members
Last Active: 7 Years Ago
Posts: 17,
Visits: 67
|
Hello Y'ers. I have one push rod that fell out. Apparently that one pushrod is bigger than all of the other pushrods. Why would this be? How would this effect the engine?
|
|
Group: Administrators
Last Active: 2 days ago
Posts: 7.3K,
Visits: 204.6K
|
The pushrod being larger than the others suggests that it had been replaced in the past. Could be a tubular pushrod while the existing pushrods may be the smaller solid stem style. There are a variety of reasons for a pushrod getting loose. Some of these include: Too long a bolt is installed in the end holes in the cylinder head thus hitting the pushrod Pushrod is contacting the head within the pushrod hole Rocker adjustment not staying put Camshaft/tappet wear Over-reving the engine Valve springs weak Worn cup in pushrod Lack of oil to topend Worn rocker and/or rocker shaft Once the reason for the dislodged pushrod is determined, simply correct and replace the pushrod.
  Lorena, Texas (South of Waco)
|