Hitting on all eight cylinders
Group: Forum Members
Last Active: 10 Years Ago
Posts: 4,
Visits: 62
|
Located in Suffolk, VA...... Complete 1960 Y 292 Ford engine and light duty 3 speed transmission. 2 barrel Holley carburetor with original breather cover. Fully functional I drive it everyday to work. Engine and transmission were overhauled approx 6 years ago and have less than 3000 miles on both. Will be removing to install something different. Engine will be available in approx 4-6 weeks. $2500 obo. Buyer must arrange all shipping. I will not ship but have a freight drop point close by that we can use.
|
Group: Forum Members
Last Active: 14 hours ago
Posts: 2.0K,
Visits: 119.1K
|
Good luck with your sale. You may also want to advertise on eBay and/or Craigslist.
Daniel JessupLancaster, California aka "The Hot Rod Reverend" check out the 1955 Ford Fairlane build at www.hotrodreverend.com
|
Group: Forum Members
Last Active: 8 Months Ago
Posts: 3.3K,
Visits: 238.8K
|
I'm surprised to see a 1960 engine still equipped with that horribly inefficient single exhaust crossover setup. Just going to a decent dual exhaust setup would give more power, if that's what your change is about?
Paul
|
Group: Forum Members
Last Active: 2 Years Ago
Posts: 575,
Visits: 14.6K
|
I had a 63 F-100 with the same set up. It seemed to have enough power and it ran great.
~DJ~ AKA "Bleach" 1956 Ford Fairlane Town Sedan 30K original miles
|
Group: Forum Members
Last Active: 14 hours ago
Posts: 2.0K,
Visits: 119.1K
|
I am sure those low compression, small valve heads in those Y's help out the low end values.
Daniel JessupLancaster, California aka "The Hot Rod Reverend" check out the 1955 Ford Fairlane build at www.hotrodreverend.com
|
Group: Forum Members
Last Active: 8 Months Ago
Posts: 3.3K,
Visits: 238.8K
|
Ford apparently originally used that setup so as to not have the expense & bother of different exhaust systems with regard to transmissions, clutches linkages etc. However, in a test of several exhaust setups done by our moderator Ted not long ago, the old crossover exhaust system finished dead last in efficiency...
Paul
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 10 Years Ago
Posts: 4,
Visits: 62
|
I am selling the setup to put something bigger ... Looking at a 460. I have no problem with it just that it does not feel right as a daily driver. I also think that if someone want to do a restoration for show it would be perfect for them.
|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 1,
Visits: 1
|
This may sound crazy, but can't get a yes without risking a no. My Dad's restoring a 55 F100 and looking for a 272 or 292 for it, since it came with a I6. I see what you have here and was wondering if you would have any interest in a go cart that I have $2500 invested in. It's 5hp, pull start, Carter Brothers Bigfoot from the early 90s.
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 10 Years Ago
Posts: 4,
Visits: 62
|
You have pics of it?
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 10 Years Ago
Posts: 4,
Visits: 62
|
It has been sold. Thanks for looking.
|