do you have a truckfront cover and damper. i have a truck waterpump that uses a cast 2shiv pulley. the shaft is 3/4 on the waterpump and the waterpump is bigger on the truck pump.i have both front covers so the diference is obveous. if you ar stuck would sell the pulley and or water pump and pulley. cliff.

Darrell, it's a cast iron pulley. The third one wouldn't be removable.

  Dennis in Lititz PA

Pinto, I have one exactly like that located. I have not measured the back space on it yet. I put it on the hold list because I did not want the extra pulley on the front of it. I would never use the third groove. I considered removing it but it looks to be a little more than just taking it loose.

Darrell Howard Whitefish, MT Outlaw 56 Ford F-100's

Darrell, I believe I have what you need.


  Dennis in Lititz PA

You will need to measure the backspace on your original pulley that lines up.


South Australia

Slick, do you think the one on ebay will fit and line up with the double pulley dampner? So far all the ones I have found in the junk yard are too big in diameter, or they have different size grooves or combination of sizes. I need double 3/8 about 6" in diameter. I found a chevy one that looked perfect, but it would not line up and the direction was wrong to shim.

Darrell Howard Whitefish, MT Outlaw 56 Ford F-100's

Slick, do you think the one on ebay will fit and line up with the double pulley dampner?

Darrell Howard Whitefish, MT Outlaw 56 Ford F-100's

I am running single vee, but i have a dual one here (somewhere...).


South Australia

Will do Slick, thanks for the heads up. Are you running dual belts? Or different single pully applications?

Darrell Howard Whitefish, MT Outlaw 56 Ford F-100's

Have a look at other engines in the Ford family, centre hole and 4 bolt holes line up.

South Australia