Guys, where can i buy new 1.54 rocker arms, am only after the rockers and not assy,s. Thank you all. Regards bill.      


  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia

Try John Mummert at: http://www.ford-y-block.com/valvetrain.htm I think he had some new ones. Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Chuck, john had advertised them with shafts etc as i understand it, and was only after the arms, thanks. , i will pm him. regards bill.



  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia

John does sell them individually without shafts, I recently got some.

55 Vicky & customline

58 Rack Dump, 55 F350 yard truck, 57 F100

59 & 61 P 400's, 58 F100 custom cab, 69 F100, 79 F150, 82 F600 ramp truck, 90 mustang conv 7 up, 94 Mustang, Should I continue?

Are the rockers mixed on the shafts or is it a right and left set with different rockers? Some folks have changed half the rockers on the same banks to effect the cam. Not sure what was done but either the intake or exhaust rockers were switched out. Chuck


Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

I recall Ted saying something about this a while back.  I did a quick search but could not find it.



Mark

1956 Mercury M100
1955 Ford Fairlane Club Sedan
Delta, British Columbia

Games like high ratio intake and low ratio exhaust can help to trade some loss of top-end HP for a gain in low-end torque.
Off the shelf, John's high ratio ass'y came all high ratio. If you wanted custom, I imagine he'd do that too.

I had pm,d him twice on here but no reply, not sure if its working! in the meanwhile customer settled for used set.


  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia

The Falcon 144 & 170 six cylinder engines used the same rockers as the y block.

Interesting, if that's true. I wonder if any Ford dealers might still have those parts?  Otherwise it would require finding two salvage engines to get a full 8 cyl set. And what ratio are they? 


Paul