I acquired a 1957 Ranchero project,  The floors, toe boards and rockers panels are gone.  I don't mean in bad shape but totally missing.
If somebody knows of a decent usable donor floor pan or parts car somewhat near the Pacific Northwest please let me know.
Thanks
Jeff

Jeff Petersen

Can't help with used pieces, but some of what you need is likely available new from EMS. They advertise in Hemmings and in other auto publications... 


Paul

Have you or do you know of anybody that has used their pieces.  I was wondering about their quality and fitment,

Thanks

Jeff

Jeff Petersen

I sent a PM

miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ

Last year I installed one of their floor braces in my '55 Club sedan.  Quality appeared to be very good but not cheap.  The piece was slightly oversized and needed to be trimmed to fit.  The dimples in my floor boards did not match the hole locations on the floor braces (off by about 3/8").  However since the previous owner of my car had replaced the floor panel (but not yet drilled any holes) I suspect the new floor boards had the dimples off slightly.  I corrected the dimple location with a couple of well aimed whacks with a ball peen hammer.


Mark

1956 Mercury M100
1955 Ford Fairlane Club Sedan
Delta, British Columbia

I used EMS panels on my 57 custom 2dr and I think they are the best on the market.

Glen Henderson



Freedom is not Free

Letohatchee, AL